After retrofit 6WB , AhM fault - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: After retrofit 6WB , AhM fault (/showthread.php?tid=60892) |
After retrofit 6WB , AhM fault - laso - 19-02-2022 I have a problem after replacing 6WB, I have fault a trailer module. ISTA shows error „No massage (display, check control bypass 02, 0x329) receiver Kombi, AHM transmitter. „ Car is F30 pre LCI equipped with NBT EVO. AHM is from the pre-lift model, i.e. there are two trailer modules RE: After retrofit 6WB , AhM fault - RuleNormaliai - 19-02-2022 you coded your kombi incorrect. RE: After retrofit 6WB , AhM fault - pepi - 05-04-2022 I have the same issue , retrofitted 6WB on F30 ,injected CAFD for KOMBI , coded all other modules to default after changed VO to 6WB and the only fault code is E11505 No massage (display, check control bypass 02, 0x329) receiver Kombi, transmiter " and the hitch fault appear on dashboard. So , did you find the solution at your problem. RE: After retrofit 6WB , AhM fault - gt678 - 05-04-2022 Solution is easy, just code cluster without trailer in FA. RE: After retrofit 6WB , AhM fault - pepi - 05-04-2022 So , I remove 3AC from FA , code cluster then set back 3AC to FA and I do not code cluster - is that it? RE: After retrofit 6WB , AhM fault - PsevDo - 05-04-2022 (05-04-2022, 15:56 PM)pepi Wrote: So , I remove 3AC from FA , code cluster then set back 3AC to FA and I do not code cluster - is that it?code only cluster without 3ac RE: After retrofit 6WB , AhM fault - pepi - 05-04-2022 (05-04-2022, 16:12 PM)PsevDo Wrote:(05-04-2022, 15:56 PM)pepi Wrote: So , I remove 3AC from FA , code cluster then set back 3AC to FA and I do not code cluster - is that it?code only cluster without 3ac Thanks for replay. Should I do it like I say or do it with FDL editing . On FDL cant find where to disable . RE: After retrofit 6WB , AhM fault - Spitfire555 - 05-04-2022 (05-04-2022, 14:50 PM)pepi Wrote: I have the same issue , retrofitted 6WB on F30 ,injected CAFD for KOMBI , coded all other modules to default after changed VO to 6WB and the only fault code is Simply FDL code the 6WB instrument cluster. Set the following parameters to "nicht_aktiv":
|