e70 Kafas retrofit --> no initialisation with ECU??? - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: e70 Kafas retrofit --> no initialisation with ECU??? (/showthread.php?tid=61180) Pages:
1
2
|
e70 Kafas retrofit --> no initialisation with ECU??? - acolt - 25-02-2022 hey guys, i have following issue: e70 preLCI, JBBF3R retroffitted already (from LCI). Now i am adding KAFAS. Windshield changed, cam installed ecu connected like oem. KAFAS is visible on ECU tree BUT! as i start tool32 prg it shows me initialisation error with ecu.... - ncs expert doesnt read it - inpa see ECU, see donor VIN and also AIF (whan doing whole car check) --- doing whole car DTC read, it see 5-9 errors but no KAFAS detailed read... - winkfpt aborts flash because of initialisation error... I have already tried a second ECU, but it is all the same... I have tried to hange PT can lines --> causing disapperaing KAFAS from ecu tree and shorting all units on PTcan i am stuck, what could be the problem??? Missing FRM3? (i dont think so, because for communication it uses JBBF as gateway) UPD: tried WIN10 with ICOM, WIN11 with DCAN... all other modules are readable Whole car read DTC: Yes, ECUS are correct, doublechecked, both are for e/7x (one of them): RE: e70 Kafas retrofit --> no initialisation with ECU??? - acolt - 25-02-2022 Nonne has any info or any idea??? RE: e70 Kafas retrofit --> no initialisation with ECU??? - stecom90 - 25-02-2022 Hi, Do you have all the files needed for this module ? (Ediabas,..) Check with total commander. JBBF is ok ? RE: e70 Kafas retrofit --> no initialisation with ECU??? - larshutten - 25-02-2022 Init error from my experience is faulty ediabas.ini what interface are you using? ICOM by hand? Any faults in ecu with ista? RE: e70 Kafas retrofit --> no initialisation with ECU??? - acolt - 25-02-2022 As I said, whole car is readable, except of kafas. Used icom and used also dcan RE: e70 Kafas retrofit --> no initialisation with ECU??? - jaramillo - 25-02-2022 Have you tried a different prg? RE: e70 Kafas retrofit --> no initialisation with ECU??? - Freddy1 - 26-02-2022 There is no other prg as kafas70 if I see it right, or is it TLC_60.prg?. Which JBBF3 version are you using? I remember there was something, if you want to retrofit a E7X camera onto another Exx vehicle, but I´m not sure anymore RE: e70 Kafas retrofit --> no initialisation with ECU??? - Transauto - 26-02-2022 (26-02-2022, 16:17 PM)Freddy1 Wrote: There is no other prg as kafas70 if I see it right, or is it TLC_60.prg?. Which JBBF3 version are you using? I remember there was something, if you want to retrofit a E7X camera onto another Exx vehicle, but I´m not sure anymoreSomething wrong with your kafas70.prg Try copy one from Ista ECU folder to Ediabas\ECU RE: e70 Kafas retrofit --> no initialisation with ECU??? - Hase77 - 26-02-2022 This control unit is from the e60 RE: e70 Kafas retrofit --> no initialisation with ECU??? - SweetBMW - 26-02-2022 Run ista p. Does it tell you to replace kafas? Part number is correct for e70 but vin is from e60 |