+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Esys Accidentally pushed Do not use!! (/showthread.php?tid=61251)
Pages:
1
2
Esys Accidentally pushed Do not use!! - EngineerX - 26-02-2022
When i try to code KOMBI and LSZ accidentally I pushed do not use and now no ignition in motorrad
RE: Esys Accidentally pushed Do not use!! - Homersbud - 26-02-2022
did you perform any type of backup prior? if i recall, that button puts everything to default.
doing a restore should bring everything back up.
RE: Esys Accidentally pushed Do not use!! - elthox - 26-02-2022
(26-02-2022, 19:44 PM)EngineerX Wrote: When i try to code KOMBI and LSZ accidentally I pushed do not use and now no ignition in motorrad
You cant connect ista?
RE: Esys Accidentally pushed Do not use!! - flashxcode - 26-02-2022
nothing bad. just hit detect cafd, then vo code.
RE: Esys Accidentally pushed Do not use!! - EngineerX - 26-02-2022
I cannot turn the ignition on only one could i try is disconnecting the connector to LSZ “ews” and connect it not propperly to turn ignition position 1 i can code and diagnose all ecus except EWS, i have backup of SVT and FA
RE: Esys Accidentally pushed Do not use!! - BMWS1000RR - 26-02-2022
You have not provided enough information about the motorcycle. My guess based on what you describe is you have a Push to Start button. That no longer works?
IF you try to jump that push to start you will fuse enable the DME and it will not reset very easy.
If you have default factory loaded you erased the FSC options and the push to start was part of that. you now have alot of work to fix this.
RE: Esys Accidentally pushed Do not use!! - Vojno - 27-02-2022
I also think there is too little information on exactly what it is about...
What a motorcycle? At least a development series or type/model code?
LSZ doesn't exist on Bike, I guess you mean EWS which is the key reader.
I don't want to educate you but very misleading. Sory
RE: Esys Accidentally pushed Do not use!! - bennymx - 27-02-2022
LSZ meaning keyless ride which is EWS anyway. Maybe it is K50/K51/K52/K53/K54 most likely. Or K69.
RE: Esys Accidentally pushed Do not use!! - EngineerX - 27-02-2022
It is an K53 LSZ is Keyless ecu or EWS simply when i try to code KOMBI and LSZ “Ews” i push accidentally Do not use!! Bottom now i cannot turn on the ignition
RE: Esys Accidentally pushed Do not use!! - larshutten - 27-02-2022
Not sure if works for motorcycle;
1, detect cafd for swe enable hazard lights and vo code
2, remove battery terminal, wait 5-10min, connect battery and same as option 1
Maybe not work but worth a shot.