+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: General Motors (GM) (https://cartechnology.co.uk/forumdisplay.php?fid=70)
+---- Thread: GM DPS Guide (/showthread.php?tid=61290)
GM DPS Guide - dfitz21 - 27-02-2022
I found development programming system, got it installed and talking to a car with my mdi2. I am trying to get the xml files from the folder that sps saves them to but I am having a bit of trouble. In the video they show the procedure with the old SPS that resided on the computer. Recently that was updated on my computer to techline connect. I logged into the ac delco portal and launched a vin of SPS that I had but when I go to that folder the xml files arent in there and it errors out. Should I purchase another vin license? Should I look for an older version of SPS? Would I need to purchase vin license each time I want to get the xml files? Id just like to remove some RPO codes once in a while. Videos on cameraloops are very helpful but I must be doing something wrong. Would gladly pay for someone to guide me.
D
RE: GM DPS Guide - libbservice - 24-05-2022
There nothing to pay, just files going stored in cacheInternal folder and two more.
RE: GM DPS Guide - eautocheck - 04-06-2022
try this pdf. I have more stuff also. Just need to find it. It is in Spanish but easy enough to figure out and has pictures. Plus it is free.
Thanks and rep appreciated
RE: GM DPS Guide - pupu144 - 04-06-2022
(04-06-2022, 05:08 AM)eautocheck Wrote: try this pdf. I have more stuff also. Just need to find it. It is in Spanish but easy enough to figure out and has pictures. Plus it is free.
Thanks and rep appreciated
Thanks, looks interesting..
Although, it seems like it is mainly the same info available on Cameraloops (already in English).
RE: GM DPS Guide - eautocheck - 04-06-2022
(04-06-2022, 08:47 AM)pupu144 Wrote:(04-06-2022, 05:08 AM)eautocheck Wrote: try this pdf. I have more stuff also. Just need to find it. It is in Spanish but easy enough to figure out and has pictures. Plus it is free.
Thanks and rep appreciated
Thanks, looks interesting..
Although, it seems like it is mainly the same info available on Cameraloops (already in English).
cameraloops is a ripoff and most people never go to that dump of a website. There is a guy there that is also a longtime member of numerous forums and he probably posted his stuff there also since he sells training. Either way nobody posted any help info here so I did. If you have it in english then upload it and share with other members here.
RE: GM DPS Guide - dfitz21 - 10-08-2022
Here is the guide in english. Need to create xml file to modify rpo codes and remove things like TPMS
RE: GM DPS Guide - di4gnostico - 19-08-2022
(10-08-2022, 10:38 AM)dfitz21 Wrote: Here is the guide in english. Need to create xml file to modify rpo codes and remove things like TPMS
Friend I think I have the information
It is a tutorial with images
look on page 42,43,44,45
ECU Configuration (XML) An ECU configuration event allows the user to perform a bit/byte configuration within an ECU that based on RPO/vehicle content. The logic to trigger this event is determined from a file of XML configuration. DPS allows an engineer to validate their logical XML against various RPO settings (user defined). This DPS functionality is primarily used during the development of the XML file. by For this reason, no "configuration event" files were provided with the DPS installation. XML configuration files are provided by the DPS user. The file XML should be copied to the \DPS\Config\ folder location where DPS is installed (usually C:\DPS\Config\**). Any log data file user-defined build (.txt or .xml), if any, should also be copied to this same location in binder. ** This is the location where DPS installs the .XSD (XML Schema files). To use the ECU setup function, set the communication settings, and then do click the ECU Setup button. Note: ECU setup only supports certain protocols GMLAN and UDS. In the ECU Configuration dialog, click Select XML Configuration. File button. Click the Select Build Data File button. Click the Run button. I know log the results of the XML configuration event.
RE: GM DPS Guide - Arbe - 06-09-2022
Hi,
Another document for DPS interpreters
| interpreters-april-01-2011.docx | ||
| File Type: |
|
 |
| Downloaded: | 168 times | |
| Size: | 516.89 KB | |