+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Solved ✔ VW PCR2.1 Clone (/showthread.php?tid=61975)
Pages:
1
2
VW PCR2.1 Clone - MahoJohn - 15-03-2022
hi neeed to clone from orginal to new ecu,
thx,
RE: VW PCR2.1 Clone - loki954 - 15-03-2022
you need the id of the processor as well
RE: VW PCR2.1 Clone - MahoJohn - 15-03-2022
(15-03-2022, 14:58 PM)loki954 Wrote: you need the id of the processor as well
ok, its infineon tricore sak-tc1796-256f150e
thats from new ecu,
thx
RE: VW PCR2.1 Clone - loki954 - 15-03-2022
(15-03-2022, 15:07 PM)MahoJohn Wrote:(15-03-2022, 14:58 PM)loki954 Wrote: you need the id of the processor as well
ok, its infineon tricore sak-tc1796-256f150e
thats from new ecu,
thx
nope
you have to read the id
there is id in the memory of the chip. from the two ecu
RE: VW PCR2.1 Clone - MahoJohn - 15-03-2022
(15-03-2022, 15:09 PM)loki954 Wrote:(15-03-2022, 15:07 PM)MahoJohn Wrote:(15-03-2022, 14:58 PM)loki954 Wrote: you need the id of the processor as well
ok, its infineon tricore sak-tc1796-256f150e
thats from new ecu,
thx
nope
you have to read the id
i hope its help
RE: VW PCR2.1 Clone - lupu_sandu - 15-03-2022
Only need eeprom no other info for PCR transfer.
Neverthe less after write eeprom back you MUST write frf file to match original ECU.
Put this eeprom in ecu and reflash with 03L906023NQ frf
03L906023NQ - original ECU with power class 55 (SH ecu have power class 3A)
RE: VW PCR2.1 Clone - MahoJohn - 15-03-2022
(15-03-2022, 15:25 PM)lupu_sandu Wrote: Only need eeprom no other info for PCR transfer.
Neverthe less after write eeprom back you MUST write frf file to match original ECU.
Put this eeprom in ecu and reflash with 03L906023NQ frf
03L906023NQ - original ECU with power class 55 (SH ecu have power class 3A)
thx,
so write you edit eprom and write the flash file from original ecu, did I understand it correctly?
RE: VW PCR2.1 Clone - ROD-BENDERS - 15-03-2022
(15-03-2022, 15:36 PM)MahoJohn Wrote:(15-03-2022, 15:25 PM)lupu_sandu Wrote: Only need eeprom no other info for PCR transfer.
Neverthe less after write eeprom back you MUST write frf file to match original ECU.
Put this eeprom in ecu and reflash with 03L906023NQ frf
03L906023NQ - original ECU with power class 55 (SH ecu have power class 3A)
thx,
so write you edit eprom and write the flash file from original ecu, did I understand it correctly?
No !
Read lupu answer to you again
RE: VW PCR2.1 Clone - MahoJohn - 24-03-2022
hi, i dont find the 03L906023NQ frf,
can someone send it to me? thx,
RE: VW PCR2.1 Clone - kaToo - 24-03-2022
here you have frf file with same number
here you have frf file with same number