Solved ✔ ford smax 1.6 tdci sid 807 evo read clone ktag 7020 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12) +--- Thread: Solved ✔ ford smax 1.6 tdci sid 807 evo read clone ktag 7020 (/showthread.php?tid=62036) |
ford smax 1.6 tdci sid 807 evo read clone ktag 7020 - skyrimzz - 16-03-2022 hey guys,is it possible to read and write this ecu with ktag clone 7020 red pcb?in boot.i have 2 protocols 178 and 511 and on 511 need to connect ktag ith obd2 to id ecu!did anyone read it with ktag clone?thanks in advance RE: ford smax 1.6 tdci sid 807 evo read clone ktag 7020 - skyrimzz - 17-03-2022 update!for everyone who wants to do 807 evo it is possible with ktag clone red pcb 7020,k suite 2.25. protocols continental sid 807 ford TPROT8 PROTOCOL 511 u have info,connect obd 2 cable from ktag to car and turn on ignition it will start to read,when it goes on 100% it will tell u that is successful and that u can remove unit and disassemble ecu after that use pinout that is on photos of ktag 3x12v ,use orange wire for additional 12v..2 red and 1 orange! ground black,can high can low.. 3 boot and 1 cf.. i have used stable power supply,not the one from ktag! hope it will help someone! RE: SOLVED!ford smax 1.6 tdci sid 807 evo read clone ktag 7020 - votkarel - 29-11-2022 I dont understand, Ktag dont have OBD2 cable, how to connect obd2 cable to ktag? maybe you mean to connect kess obd2 ? RE: SOLVED!ford smax 1.6 tdci sid 807 evo read clone ktag 7020 - bboctavian - 29-11-2022 (29-11-2022, 15:57 PM)votkarel Wrote: I dont understand, Ktag dont have OBD2 cable, how to connect obd2 cable to ktag? maybe you mean to connect kess obd2 ? It has obd cable. code: 144300t108 skyrimzz thanks for sharing |