+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: [REQ] BMW F-series - programming (/showthread.php?tid=6253)
[REQ] BMW F-series - programming - amstel - 04-09-2014
Hi guys,
First at all I would like to thank you everyone for this great forum.
I spent a lot of time on searching but unfortunately I did not find an answer to my questions.
I am going to buy a clone ICOM A2+B+C to program F-Serie (mainly F10).
1. Which program and version you can recommend for a safe programming F-Serie:
a) ISTA\P
b) Rheingold
c) BMW E-SYS
d) NCSExpert
2.What is the main diffrences between those programs?
Thank you in advance.
RE: [REQ] BMW F-series - programming - inspi1981 - 04-09-2014
(04-09-2014, 08:05 AM)amstel Wrote: Hi guys,
First at all I would like to thank you everyone for this great forum.
I spent a lot of time on searching but unfortunately I did not find an answer to my questions.
I am going to buy a clone ICOM A2+B+C to program F-Serie (mainly F10).
1. Which program and version you can recommend for a safe programming F-Serie:
a) ISTA\P
b) Rheingold
c) BMW E-SYS
d) NCSExpert
2.What is the main diffrences between those programs?
Thank you in advance.
ISTA/P-for programming and coding all cars
Rheingold-for diagnostics all cars
E-Sys-for programming and coding F-series
NCSExpert-for coding E-series
RE: [REQ] BMW F-series - programming - M-Simon - 04-09-2014
For safe programming of a BMW Car, you should use the same tool than in the workshop.
It is ISTA-P.
E-Sys and NCSExpert is more for the R&D Area from the manufactor. Here you need more backround know how.
ISTA-P ist made for a safe and comfortable usage with an good graphical user interface.
Rheingold is for Diagnostic only.
RE: [REQ] BMW F-series - programming - bmwcode - 05-06-2015
(04-09-2014, 08:05 AM)amstel Wrote: Hi guys,
First at all I would like to thank you everyone for this great forum.
I spent a lot of time on searching but unfortunately I did not find an answer to my questions.
I am going to buy a clone ICOM A2+B+C to program F-Serie (mainly F10).
1. Which program and version you can recommend for a safe programming F-Serie:
a) ISTA\P
b) Rheingold
c) BMW E-SYS
d) NCSExpert
2.What is the main diffrences between those programs?
Thank you in advance.
Rheingold ISTA D (standalone) is good for dianostic for BMW F series using ENET cable.
RE: [REQ] BMW F-series - programming - steven_s - 06-06-2015
Does Rheingold ISTA-D work on Mini F5x?
RE: [REQ] BMW F-series - programming - brunofraga - 06-06-2015
(06-06-2015, 10:25 AM)steven_s Wrote: Does Rheingold ISTA-D work on Mini F5x?
Yes, that is the BMW AG Group diagnostic software it support all bmw, mini and RR.
RE: [REQ] BMW F-series - programming - bimmer71 - 18-09-2015
Istap 3.56.2 or higher other wise you think something's wrong as it will take like 45min to determine a measures plan and once done the final report OMG 25 30 min as well ! do a complete coding for safe sake !