2013 X5 35dX limp mode - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: 2013 X5 35dX limp mode (/showthread.php?tid=62615) |
2013 X5 35dX limp mode - koziol - 30-03-2022 2013 BMW X5dx car came with few errors after error delete 2 still there 4670 and 48dd and after driving of 50 m goes to limp mode already checked wires continiuty from charging pressure sensor to ecm all ok RE: 2013 X5 35dX limp mode - 2013m5 - 30-03-2022 (30-03-2022, 01:52 AM)koziol Wrote: 2013 BMW X5dx car came with few errors You should check the DDE Voltage Supply. RE: 2013 X5 35dX limp mode - jaramillo - 30-03-2022 (30-03-2022, 02:09 AM)2013m5 Wrote:Totally agree, check sings of corrosion, check voltage drops, usually you get continuity but current or volatege drops(30-03-2022, 01:52 AM)koziol Wrote: 2013 BMW X5dx car came with few errors RE: 2013 X5 35dX limp mode - koziol - 30-03-2022 whats the proper voltage supply for that sensor ? RE: 2013 X5 35dX limp mode - jaramillo - 30-03-2022 You can calculate test plan and ISTA will guide you with that info Check voltage/Current to DDE RE: 2013 X5 35dX limp mode - willisodhiambo - 01-04-2022 I have seen a similar problem but never resolved it. All sensors and wires checked out. I did not check dde supply though because I did not have that fault. |