EDC15P+ on bench - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12) +--- Thread: EDC15P+ on bench (/showthread.php?tid=62828) |
EDC15P+ on bench - sanndo - 04-04-2022 Hello! I need some help to connect vag edc15p on bench... What cable on kess v2 need to use and how to connect? RE: EDC15P+ on bench - sanndo - 04-04-2022 Whatever I try ending with wakeup error... RE: EDC15P+ on bench - YGRemaps - 04-04-2022 desolder job AMF400 chip and read with programmer or try with mpps v18 before 1 hour i write ecu with this number with mpps no problem RE: EDC15P+ on bench - sanndo - 04-04-2022 (04-04-2022, 14:00 PM)YGRemaps Wrote: desolder job AMF400 chip and read with programmer or try with mpps v18 before 1 hour i write ecu with this number with mpps no problemupdate: mpps v18 read and write it on bench with no problem.. Kess don't RE: EDC15P+ on bench - eip - 04-04-2022 Make bdm with ktag. Fast way. RE: EDC15P+ on bench - ostrosiowaty - 04-04-2022 Kess bad clone doesnt work good with K-Line, better mpps use for this job. Very fast tool Best Regards RE: EDC15P+ on bench - fisekovic - 04-04-2022 Because you were using tricore adapter with kess lol. You just needed obd cable just as you used mpps RE: EDC15P+ on bench - YGRemaps - 05-04-2022 (04-04-2022, 14:14 PM)sanndo Wrote:(04-04-2022, 14:00 PM)YGRemaps Wrote: desolder job AMF400 chip and read with programmer or try with mpps v18 before 1 hour i write ecu with this number with mpps no problemupdate: Protocols or what ksuite version u using ? |