+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: AIRBAG (https://cartechnology.co.uk/forumdisplay.php?fid=13)
+--- Thread: Xhourse Renesas R7F701013 Renaul Captur FL (/showthread.php?tid=62856)
Xhourse Renesas R7F701013 Renaul Captur FL - das890 - 04-04-2022
 Xhourse Renesas R7F701013 Renaul Captur FL
Quote:Hello, I have a problem and I have a question.
I read the Xhoursem Renesas R7F701013 processor in the SRS Renaul Captur FL module
I made copies of all memory areas. By uploading the modified file, the file verification is ok and the rest of the memory areas too. When the airbag controller is installed in the car and the ignition is turned on, it receives information about the fault. reading the SRS unit again dataflash are corrupted.
Attention !!!
The situation is the same when I upload all the original files
Can anybody help me to explain this?
Please help
PS:
I will add that on the original file everything was ok and there was no fault, I read it to check the Xhorsa device, then I programmed the changed file and my problem will start. When I go back to saving the original, veryificatory is ok, but as soon as I connect it to the can line, the file is damaged and the serial numbers are not visible and the whole file is damaged