G20 TCB moudule change and coded but have fault - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: G20 TCB moudule change and coded but have fault (/showthread.php?tid=63369) |
G20 TCB moudule change and coded but have fault - iyade46 - 16-04-2022 G20 TCB moudule change and coded but have fault 026180 TCB: Ceertificates (type 1) not ready any idea how to fix that fault thanks in advance RE: G20 TCB moudule change and coded but have fault - larshutten - 16-04-2022 New or used? Check certificate status in esys. If not accepted you need aos access to upload request and download new certificate. RE: G20 TCB moudule change and coded but have fault - iyade46 - 16-04-2022 (16-04-2022, 10:23 AM)larshutten Wrote: New or used? Yes it's used moudule I don't have aos is there another way? RE: G20 TCB moudule change and coded but have fault - iyade46 - 17-04-2022 any way to disable that fault? RE: G20 TCB moudule change and coded but have fault - dasi - 17-04-2022 (17-04-2022, 09:41 AM)iyade46 Wrote: any way to disable that fault? only way through BMW AOS RE: G20 TCB moudule change and coded but have fault - tokarszczak - 19-04-2022 Can fix this remotely. |