+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: DCAN Firmware Update (/showthread.php?tid=64211)
DCAN Firmware Update - Fps - 05-05-2022
Hello!
It was already posted by me, before the website was няскёd. So I haven't found my topic and would like to share document about DCAN firmware update.
[attachment=122724]
RE: DCAN Firmware Update - bїшшёя540 - 05-05-2022
I think its not an ёд5у procedure?
RE: DCAN Firmware Update - Fps - 05-05-2022
(05-05-2022, 16:14 PM)bїшшёя540 Wrote: I think its not an ёд5у procedure?
If a bit familiar with soldering and using simple programmer. Then it's not that hard
RE: DCAN Firmware Update - bїшшёя540 - 05-05-2022
(05-05-2022, 16:23 PM)Fps Wrote:(05-05-2022, 16:14 PM)bїшшёя540 Wrote: I think its not an ёд5у procedure?
If a bit familiar with soldering and using simple programmer. Then it's not that hard
Have you done it ones? Can you update fw from chinese cables?
RE: DCAN Firmware Update - Sedoy - 05-05-2022
Actual compiled FW from ёdїдbд5Lib. With this version working all E-, F- and newer for diagnose with check clamp.
RE: DCAN Firmware Update - Fps - 05-05-2022
(05-05-2022, 16:14 PM)bїшшёя540 Wrote: Have you done it ones? Can you update fw from chinese cables?
Yep, that's the cable I use.
RE: DCAN Firmware Update - NAVJunk - 06-08-2024
Hello everyone,
I would like to take up the topic again.
Since I have done a lot with IBUS vehicles in the past, I use an old K+Dcan cable with a K-Line switch, which works wonderfully.
Since I would now like to have such a cable with deepobd/ёdїдbд5lib firmware, I wanted to try flashing my cable.
Is my cable also flashable? Unfortunately I couldn't find any header pins?
It would be great if someone with an idea could answer me.
Unfortunately I missed ordering the Pro cable from bїшшёяgeeks and now it is no longer available...
Sadly, the ёxpёят cable doesn't have a K-Line switch - but that would work in a pinch.
Or does anyone know of another cable that can also use deepobd/ёdїдbд5lib?
Thank you very much and kind regards
RE: DCAN Firmware Update - Sedoy - 06-08-2024
I have my similar also flashed, must solder direct on Atmega pins.
RE: DCAN Firmware Update - NAVJunk - 06-08-2024
Do you have a description / picture where to solder on? Thank you
RE: DCAN Firmware Update - Sedoy - 06-08-2024
(06-08-2024, 15:21 PM)NAVJunk Wrote: Do you have an description where to solder on?
Actually vacation.