Solved ✔ Range rover airbag B1211 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: AIRBAG (https://cartechnology.co.uk/forumdisplay.php?fid=13) +--- Thread: Solved ✔ Range rover airbag B1211 (/showthread.php?tid=64260) |
Range rover airbag B1211 - Klodian - 06-05-2022 Hello guys Range rover sport 2015 Airbag module Autoliv dk62-14d374-ag After clear crash have fault code B1211:11 Driver Seatbelt Retractor Pretensioner Deployment Control Circuit Short to Ground Try change seatbelt,use airbag resistor 3.3 Ohm but no result Thanks in advance RE: Range rover airbag B1211 - dragon100 - 07-05-2022 Check with 2,2ohm ... RE: Range rover airbag B1211 - fizan - 09-05-2022 (06-05-2022, 22:42 PM)Klodian Wrote: Hello guysuse 2.2 ohm resistance RE: Range rover airbag B1211 - Klodian - 11-05-2022 (09-05-2022, 07:17 AM)fizan Wrote:I also tried the 2.2 ohm resistor but again the same(06-05-2022, 22:42 PM)Klodian Wrote: Hello guysuse 2.2 ohm Solved,a solder point above one of the capacitors in the airbag module was the cause for fault, after I cleaned,everything ok,no fault,no airbag light in instrument cluster |