+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Solved ✔ Virginise x5 4.8is DME (/showthread.php?tid=64328)
Virginise x5 4.8is DME - autokorektas - 09-05-2022
Hello!
Could someone help me to virginise this ecu?
Need to sync it with EWS.
HW:0261209010
SW: 1037370376
SW Upg.:07551840
Part No.: 7544610
Read is attached.
RE: Virginise x5 4.8is DME - lupu_sandu - 09-05-2022
VIN:WBAGL61000DM64516
ISN: 3BA0
ECU came from a E65 BMW 745i
RE: Virginise x5 4.8is DME - autokorektas - 09-05-2022
(09-05-2022, 10:55 AM)lupu_sandu Wrote: VIN:WBAGL61000DM64516
ISN: 3BA0
ECU came from a E65 BMW 745i
Yes, I know it is from e65. I've flashed software to 4.8is. Now that you wrote me isn, what is the next step? Read ews3 dump and copy isn to ews? Is there any ews editor that i can use to copy isn to ews via obd?
Read with clone avdi, is this dump good?
RE: Virginise x5 4.8is DME - kimz - 09-05-2022
(09-05-2022, 11:04 AM)autokorektas Wrote:Are you sure you have EWS3? If it's e65, CAS1 should be there. Your dump doesn't look good(09-05-2022, 10:55 AM)lupu_sandu Wrote: VIN:WBAGL61000DM64516
ISN: 3BA0
ECU came from a E65 BMW 745i
Yes, I know it is from e65. I've flashed software to 4.8is. Now that you wrote me isn, what is the next step? Read ews3 dump and copy isn to ews? Is there any ews editor that i can use to copy isn to ews via obd?
Read with clone avdi, is this dump good?
RE: Virginise x5 4.8is DME - pepi - 09-05-2022
If your car is E65 then there is NO EWS on it , E65 is supplied with CAS unit and CAS it must be read with programmer or if you have proper tools you can write ISN from OBD.
RE: Virginise x5 4.8is DME - autokorektas - 09-05-2022
The car is e53 4.8is, it has ews3plus hw04, sw08. Donor ecu is from e65. The dump i provided for engine ecu is after software flash to 4.8is. Now i read ews with xprog. Could someone edit the dump, that isn from ecu would match in ews?
RE: Virginise x5 4.8is DME - lupu_sandu - 09-05-2022
Same ISN, rolling code reset
RE: Virginise x5 4.8is DME - autokorektas - 09-05-2022
(09-05-2022, 12:18 PM)lupu_sandu Wrote: Same ISN, rolling code reset
Thank you! Synchronised ews, car started!