Motorrad TFT coding options list - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Car Technology Motorbikes Forums (https://cartechnology.co.uk/forumdisplay.php?fid=23) +--- Forum: Motorbikes Softwares & Workshop Manuals (https://cartechnology.co.uk/forumdisplay.php?fid=36) +---- Forum: BMW (https://cartechnology.co.uk/forumdisplay.php?fid=126) +---- Thread: Motorrad TFT coding options list (/showthread.php?tid=64505) Pages:
1
2
|
||||||||||
Motorrad TFT coding options list - Jbpetkov - 12-05-2022 This is codings that i found with help from forum and want to share with anybody. They are all tested on f850gs and r1250gs. Will be nice if you continue to add another things here. RE: Motorrad TFT coding options list - rossi_0106 - 16-05-2022 set the cfg_HMI_Tacho from 00,01 to 00,07 which means rpm red line to 12000, and set cfg_CoreScreens_AvailableScreens to 00,1C(SPORT_CoreScreen_01-02-03) them you can get 3 sport screen. RE: Motorrad TFT coding options list - marksman530 - 29-05-2022 Why does esys pro2.8 display differently? RE: Motorrad TFT coding options list - bennymx - 30-05-2022 (29-05-2022, 14:57 PM)marksman530 Wrote: Why does esys pro2.8 display differently? CAFD not mapped. RE: Motorrad TFT coding options list - hicazkar - 26-07-2022 anybody knows how to remove speed limit 1250gs? RE: Motorrad TFT coding options list - AdiP - 21-08-2022 I don't think there is a speed limit. A RPM limit is set. You don't want to remove that limit. RE: Motorrad TFT coding options list - Nerox - 23-08-2022 Newbie question here Can these be coded with ncs expert? Or only esys? RE: Motorrad TFT coding options list - hicazkar - 25-08-2022 (23-08-2022, 14:52 PM)Nerox Wrote: Newbie question here yes only esys and fdl coding RE: Motorrad TFT coding options list - Vojno - 26-08-2022 (23-08-2022, 14:52 PM)Nerox Wrote: Newbie question here I made a small table and publish in this here in CT before! But the official dokument is clear. BN2000 can handled with ISTA-P then NCS as well. But the BN2020 you can use only ISTA+ and E-sys. See the document:
|