+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: How to program key for AUDI Q7 (/showthread.php?tid=648)
How to program key for AUDI Q7 - ivannzowa - 12-11-2013
I meet this customer who lost key for audi Q7,he order another key so help me i need to register it.
please anyone with the idea
RE: How to program key for AUDI Q7 - totalkey - 12-11-2013
What tools do you got?
if you read ezs kessy, i can give you cs and pin, and you need to prepare transponder
RE: How to program key for AUDI Q7 - Vlado ATM Chiptuning - 13-11-2013
You must say what tool do you have, read mc9s12dg128 and you need to prepare transponder with Component security.
RE: How to program key for AUDI Q7 - BigJ - 16-05-2014
(13-11-2013, 15:04 PM)Vlado kljucar Wrote: You must say what tool do you have, read mc9s12dg128 and you need to prepare transponder with Component security.
@Vlado kljucar Thanks for this info.
I have a similar problem maybe you can point me in the right direction.
Have a Q7, no working keys. I got another transponder (Megamos 8E), read out the dump from the 9S12DG128, and set it all up using Tango. I program the modified dump back into the 9S12DG128, but VCDS still only shows 1 key but Tango shows 2, and obviously the car dont start. The new transponder is detected in the car but not authourised.
Any help will be much appreciated
Regards
J
RE: How to program key for AUDI Q7 - chriskross - 18-05-2014
I always using avdi for this job is working 100%.
@bigJ when you put in the new key is the ezs opening?
post the dump.
which tools are you using to read the eeprom?