Solved ✔ Volvo fh16 660 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Car Technology Trucks / Heavy Vehicles Forum (https://cartechnology.co.uk/forumdisplay.php?fid=22) +--- Forum: Trucks / Heavy Vehicles Problems & General Discussions (https://cartechnology.co.uk/forumdisplay.php?fid=32) +--- Thread: Solved ✔ Volvo fh16 660 (/showthread.php?tid=6484) |
Volvo fh16 660 - ed209trucks - 14-09-2014 Hi, I have a Volvo fh16 660 2007 from idle to 10,000 revs it shakes like it has a misfire but does not. I was told it may be the vibration damper (pulley) on the crank at the front, has anyone else had this experience with this? I don`t really want to change this if it is not the problem too expensive. Thanks RE: Volvo fh16 660 - citroenc4boy - 14-09-2014 (14-09-2014, 20:06 PM)ed209trucks Wrote: Hi, Hallo i wood see on the drive shaft on the bearings 4 in front and 4 in the back of the shaft take a pray bar and see for slack sorry for my bad english RE: Volvo fh16 660 - ed209trucks - 16-09-2014 (14-09-2014, 21:37 PM)citroenc4boy Wrote:(14-09-2014, 20:06 PM)ed209trucks Wrote: Hi, no this is ok thanks RE: Volvo fh16 660 - cdssa - 07-06-2015 I would suggest a diagnostic test with cylinder cut out test maybe low compression on cylinder at low idle did have similiar problem before.[img]images/smilies/rofl.gif[/img] RE: Volvo fh16 660 - ed209trucks - 17-08-2015 Problem solved. it was the duel mass flywheel. |