+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CARRADIO / NAVIGATION (https://cartechnology.co.uk/forumdisplay.php?fid=14)
+--- Thread: Mib2.5 5NA Dynaudio no sound, or? (/showthread.php?tid=65103)
Mib2.5 5NA Dynaudio no sound, or? - Mex165 - 26-05-2022
Retrofitted 5NA035020D in my 2014 Golf with a 5G0 amplifier...
Does anybody have any idea how to get the sound working?
Got sound working ONE Time!
But I had tried different datasets, codes and adaptations all day, so I have no clue what I did..
Without doing anything more than turning the ignition off and on, the sound was no more..
I know someone has solved this problem, but the solution is nowhere to be found.
The 5G0 (MIB1) amp has the same HW as 5Q0 (MIB2) amplifier?
But no flashfiles for either of them to be found.
Will try to flash a 5Q0 dataset to my 5G0, if no one thinks that's a problem?
CP is active on address 47 amplifier, so I only got sound from left front speaker (ONE TIME) . Didn't have 47 ticked in address 19 gateway installation list when ODIS was connected
RE: Mib2.5 5NA Dynaudio no sound, or? - Mex165 - 27-05-2022
Does anybody have flashfile for 5Q0035456, 5G0035456 or 5Q0035456A?
RE: Mib2.5 5NA Dynaudio no sound, or? - nirvananils - 27-05-2022
You have to change Amp to get it working.
you can try to use ASAM/ODX Dataset part of MIB1 on MIB2 Unit but never tried if it worked