BMW 5AU / Lane change / problem in esys SAS3 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: BMW 5AU / Lane change / problem in esys SAS3 (/showthread.php?tid=65151) |
BMW 5AU / Lane change / problem in esys SAS3 - jacek.marciuk - 27-05-2022 Hello, I want to unlock automatic lane change in g20 20' ece. but can't find "c_swa_vorhanden" or any similar in SAS3. any ideas ? RE: BMW 5AU / Lane change / problem in esys SAS3 - luntik - 27-05-2022 So use another launcher that has better or newer mapping RE: BMW 5AU / Lane change / problem in esys SAS3 - masa52 - 27-05-2022 send me your cafd I will activate for you Im not sure but also dsc vip need this RE: BMW 5AU / Lane change / problem in esys SAS3 - luntik - 27-05-2022 (27-05-2022, 14:46 PM)masa52 Wrote: send me your cafd I will activate for you VIP isn't required to be coded if you have SAS RE: BMW 5AU / Lane change / problem in esys SAS3 - st1 - 27-05-2022 The 3 codes to be changed are: HU_NBT or HU_MGU: Spurwechselassistent - Change this to Aktiv SAS Module: C_SWA_Vorhanden - Change this to True C_SWA_Land_Aktiv - You will have to edit the Werte values to "FF, FF, FF, FF" This is the item that blocks it from working in certain regions. RE: BMW 5AU / Lane change / problem in esys SAS3 - iliannavy - 05-10-2022 (27-05-2022, 18:08 PM)st1 Wrote: The 3 codes to be changed are: Hello. I tryed all of these settings but without success.I have 5AT.After these settings I can see on the display but is not working. Mine is SAS2 [22] CAFD_00001C7A_003_004_005 RE: BMW 5AU / Lane change / problem in esys SAS3 - jb2005 - 05-10-2022 (05-10-2022, 07:23 AM)iliannavy Wrote:(27-05-2022, 18:08 PM)st1 Wrote: The 3 codes to be changed are: You cannot enable automatic lane change on 5AT. RE: BMW 5AU / Lane change / problem in esys SAS3 - Node - 05-10-2022 (05-10-2022, 08:55 AM)jb2005 Wrote:(05-10-2022, 07:23 AM)iliannavy Wrote:(27-05-2022, 18:08 PM)st1 Wrote: The 3 codes to be changed are: That is PURE BS. My G30 has 5AT and automatic lane change is enabled FROM FACTORY. Even described in the manual!!! Whether that is useful, is totally different story Maybe if you drive on long stretches of road with only occasional other cars. RE: BMW 5AU / Lane change / problem in esys SAS3 - jb2005 - 05-10-2022 (05-10-2022, 09:02 AM)Node Wrote:(05-10-2022, 08:55 AM)jb2005 Wrote:(05-10-2022, 07:23 AM)iliannavy Wrote:(27-05-2022, 18:08 PM)st1 Wrote: The 3 codes to be changed are: Very interesting. Did your G30 catch the SP2018 package with MGU? RE: BMW 5AU / Lane change / problem in esys SAS3 - iliannavy - 05-10-2022 (05-10-2022, 09:02 AM)Node Wrote:(05-10-2022, 08:55 AM)jb2005 Wrote:(05-10-2022, 07:23 AM)iliannavy Wrote:(27-05-2022, 18:08 PM)st1 Wrote: The 3 codes to be changed are: Which cafd files I have to check? Or If you want i can send you my cafd files of needed modules or you can send yours to compare. |