bmw e39 xprog connection - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10) +--- Thread: bmw e39 xprog connection (/showthread.php?tid=65286) |
bmw e39 xprog connection - BobbySD - 30-05-2022 Hey, Ive got here Mcluster from e39 and its pcb is slightly different than those showed in xprog. Below Im attaching link to connection for enigma where is exactly the same pcb as I have. Does anybody have a connection scheme for xprog? Thank you RE: bmw e39 xprog connection - Diagmaister - 30-05-2022 Use r270 better choise RE: bmw e39 xprog connection - Spitfire555 - 31-05-2022 (30-05-2022, 16:44 PM)BobbySD Wrote: Below Im attaching link to connection for enigma where is exactly the same pcb as I have. Link doesn't work. (30-05-2022, 19:40 PM)Diagmaister Wrote: Use r270 better choise Depends on XPROG .... XPROG original is definitively the better choice than R270. XPROG clone can be less/same/better quality as R270. RE: bmw e39 xprog connection - BobbySD - 31-05-2022 link fixed. Ive got many tools r270, xprog 6.26 (clone), upa, hexprog. But I dont want to disassemble the needles so I need to do it in circuit. I think only xprog can do it as I already tried hex and in circuit nothing. Also mine xprog is working I did another e39 cluster few days ago without issues but this one have as I wrote slightly different pcb and pinout is not in xprog. RE: bmw e39 xprog connection - Spitfire555 - 01-06-2022 Pinout for XPROG attached. RE: bmw e39 xprog connection - BobbySD - 02-06-2022 yea thanks mate, but this one is in xprog itself. As you can see on the pic mine pcb is slightly different RE: bmw e39 xprog connection - Spitfire555 - 02-06-2022 (02-06-2022, 19:21 PM)BobbySD Wrote: yea thanks mate, but this one is in xprog itself. As you can see on the pic mine pcb is slightly different It's the same. You've just to turn the picture. RE: bmw e39 xprog connection - BobbySD - 02-06-2022 nope, the are around pin 4 is different, the rest is the same yes. And the pin 4 is the problem where it belongs on my pcb RE: bmw e39 xprog connection - Spitfire555 - 03-06-2022 You're right, it's a tricky difference. Try to take the Enigma Pin7 for XPROG Pin 4. I think it's the only useful option. RE: bmw e39 xprog connection - BobbySD - 03-06-2022 (03-06-2022, 06:46 AM)Spitfire555 Wrote: You're right, it's a tricky difference. Try to take the Enigma Pin7 for XPROG Pin 4. I think it's the only useful option. will try and report, thanks! |