Needed replacement EDC16cp34 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9) +--- Thread: Needed replacement EDC16cp34 (/showthread.php?tid=65692) |
Needed replacement EDC16cp34 - dob12 - 20-06-2022 HI I have VW touareg 3.0 from 2006 with a damaged ECU, no voltage for the crankshaft sensor.EDC16cp34 7L0 907 401 B / 0 281 012 773 I have a question, if having an ecu with the same numbers, it is enough to copy the eeprom, or do you need to make a clone, i.e. rewrite the full BDM. If I have an ecu with other numbers, e.g. 0281013322, 0281013406 or 0281013692, I have to make a complete clone rewriting full bdm. The second question, having a clean ecu ready to be programmed, is enough just to add it, e.g. with VCDS. Thanks . Regards RE: Needed replacement EDC16cp34 - -Harry- - 21-06-2022 you should read immo login from old (in your case, it's still working) one and new one. Then you can adapt an edc16 ecu with vcds, best and safest way i think. how it's done you can find in rosstech wiki (immo3, changing ecu). good luck. RE: Needed replacement EDC16cp34 - Gabriel87 - 22-06-2022 (20-06-2022, 20:48 PM)dob12 Wrote: HI You write full BDM or only eaprom easy ... RE: Needed replacement EDC16cp34 - dob12 - 22-06-2022 I made a full BDM copy, now I just need to find the correct ECU RE: Needed replacement EDC16cp34 - Gabriel87 - 22-06-2022 (22-06-2022, 19:59 PM)dob12 Wrote: I made a full BDM copy, 0281012773 0281013332 0281013604 0281013686 0281013692 0281014115 RE: Needed replacement EDC16cp34 - dob12 - 23-06-2022 thanks still looking |