CarTechnoloGY
Solved ✔ Vag edc17c46 clone - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Solved ✔ Vag edc17c46 clone (/showthread.php?tid=65750)



Vag edc17c46 clone - Mlody11113 - 22-06-2022

Hi all im need immo clone , pls help. for this ecu. 

Orginal to new , past read here. regards


RE: Vag edc17c46 clone - Stig33 - 22-06-2022

(22-06-2022, 09:05 AM)Mlody11113 Wrote:  Hi all im need immo clone , pls help. for this ecu. 

Orginal to new , past read here. regards

Here you have eeprom to new ecu...


RE: Vag edc17c46 clone - Mlody11113 - 22-06-2022

(22-06-2022, 10:51 AM)Stig33 Wrote:  
(22-06-2022, 09:05 AM)Mlody11113 Wrote:  Witam wszystkich potrzebuję klonu immo , pls o pomoc. do tego ecu. 

Oryginał do nowego , przeszłość przeczytaj tutaj. pozdrowienia

Tutaj masz eeprom do nowego ecu...

Car crank ,not have immo active on dash and not start

Ok my fault. Hw on org is 28 on me 27 , im disassembly. Other


RE: Vag edc17c46 clone - Mlody11113 - 22-06-2022

ita from next ecu. compare me with orginal? thank you


RE: Vag edc17c46 clone - Stig33 - 22-06-2022

The flash sw version not the same in both ecu, try upload the flash from old to new.
Please post both bosch serials fron ecus..0281XXXX

Possible not compatible two ecus.


RE: Vag edc17c46 clone - jokir - 22-06-2022

Test and report


RE: Vag edc17c46 clone - aladinnu - 22-06-2022

how can it run with new flash ? new ecu is from 2.0tdi 143 hp , original ecu is from 2.0tdi 170 hp...


RE: Vag edc17c46 clone - Mlody11113 - 22-06-2022

(22-06-2022, 15:21 PM)Stig33 Wrote:  The flash sw version not the same in both ecu, try upload the flash from old to new.
Please post both bosch serials fron ecus..0281XXXX

Possible not compatible two ecus.

Stig thank you! good work , im idiot.. swap for org ecu and car not start , im found fault on fuel valve  ( my client not talk for these on car ) , mount ecu with your work and .. the same always. Car work. thank you for u time and work ! regards