+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: MEDV17.2.G D-flash (/showthread.php?tid=66023)
Pages:
1
2
MEDV17.2.G D-flash - OBDSolutions - 28-06-2022
Hi. I'm looking for d-flash MEDV17.2.G with manual gearbox.
RE: MEDV17.2.G D-flash - Enabled - 28-06-2022
MEVD17.2.G was used in many chassis and a couple of engines. You need to be a lot more specific.
You can also simply flash it to the correct version via obd.
RE: MEDV17.2.G D-flash - dasi - 28-06-2022
(28-06-2022, 14:02 PM)Enabled Wrote: MEVD17.2.G was used in many chassis and a couple of engines. You need to be a lot more specific.
You can also simply flash it to the correct version via obd.
S55 M2C
RE: MEDV17.2.G D-flash - BMWzone - 28-06-2022
Read here :
https://cartechnology.co.uk/showthread.php?tid=63946&pid=537403#pid537403
RE: MEDV17.2.G D-flash - simonchs - 28-06-2022
Hello,
I've MEVD172G dflash file of F87 M2 Competition M/T and F80 M3 M/T, pm me if you are interested.
RE: MEDV17.2.G D-flash - Jumper - 28-06-2022
(28-06-2022, 15:19 PM) Wrote: Read here :
https://cartechnology.co.uk/showthread.php?tid=63946&pid=537403#pid537403
You need to reset the ecu config after MT-SWFL programming. The MEVD172G does not need to be replaced
RE: MEDV17.2.G D-flash - Abou Jambo - 28-06-2022
(28-06-2022, 18:57 PM)myfirst1er Wrote:(28-06-2022, 15:19 PM) Wrote: Read here :
https://cartechnology.co.uk/showthread.php?tid=63946&pid=537403#pid537403
You need to reset the ecu config after MT-SWFL programming. The MEVD172G does not need to be replaced
Yes you are right just flash DME to manual not need to change D-FLASH
ESYS can do the job easilly
RE: MEDV17.2.G D-flash - OBDSolutions - 29-06-2022
(28-06-2022, 18:57 PM)myfirst1er Wrote:(28-06-2022, 15:19 PM) Wrote: Read here :
https://cartechnology.co.uk/showthread.php?tid=63946&pid=537403#pid537403
You need to reset the ecu config after MT-SWFL programming. The MEVD172G does not need to be replaced
Could you explain how to do this?
RE: MEDV17.2.G D-flash - Enabled - 29-06-2022
(29-06-2022, 07:17 AM)OBDSolutions Wrote:(28-06-2022, 18:57 PM)myfirst1er Wrote:(28-06-2022, 15:19 PM) Wrote: Read here :
https://cartechnology.co.uk/showthread.php?tid=63946&pid=537403#pid537403
You need to reset the ecu config after MT-SWFL programming. The MEVD172G does not need to be replaced
Could you explain how to do this?
Tool32, S55.prg, run job ecu_config_reset
Although I haven't once had to do this, and I've done a ton of these
RE: MEDV17.2.G D-flash - simonchs - 29-06-2022
(29-06-2022, 14:37 PM)Enabled Wrote:(29-06-2022, 07:17 AM)OBDSolutions Wrote:(28-06-2022, 18:57 PM)myfirst1er Wrote:(28-06-2022, 15:19 PM) Wrote: Read here :
https://cartechnology.co.uk/showthread.php?tid=63946&pid=537403#pid537403
You need to reset the ecu config after MT-SWFL programming. The MEVD172G does not need to be replaced
Could you explain how to do this?
Tool32, S55.prg, run job ecu_config_reset
Although I haven't once had to do this, and I've done a ton of these
Although I’ve paid several € to solve my problem, but it’s always good when a real solution posted.
(28-06-2022, 19:03 PM)Abou Jambo Wrote:(28-06-2022, 18:57 PM)myfirst1er Wrote:(28-06-2022, 15:19 PM) Wrote: Read here :
https://cartechnology.co.uk/showthread.php?tid=63946&pid=537403#pid537403
You need to reset the ecu config after MT-SWFL programming. The MEVD172G does not need to be replaced
Yes you are right just flash DME to manual not need to change D-FLASH
ESYS can do the job easilly
"just flash DME to manual" do not help, and seems a real solution is with Tool32