E70 LCI Tail lights retrofit : coding ? but how ? - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: E70 LCI Tail lights retrofit : coding ? but how ? (/showthread.php?tid=66172) Pages:
1
2
|
E70 LCI Tail lights retrofit : coding ? but how ? - Orphee - 01-07-2022 Hello, I just retrofited genuine LCI tail lights on my pre-LCI X5 E70. I thought I would be able to code the retrofit with ISTA-P, but I can't find the option in retrofit list. Could I have some help ? Do I have to use NCS Expert instead ? if so, how ? Thanks for your help RE: E70 LCI Tail lights retrofit : coding ? but how ? - stecom90 - 01-07-2022 Hello, Use NCS, add +MUEH to FA RE: E70 LCI Tail lights retrofit : coding ? but how ? - Orphee - 01-07-2022 I found the following "tutorial" with NCS Expert : I applied it, but I still have "Brake force display" in error in Idrive and In FRM module error memory. RE: E70 LCI Tail lights retrofit : coding ? but how ? - stecom90 - 01-07-2022 Try to disable cold/warm check, BFD.... CC_MELD_BFD_BL -> nicht_aktiv FEHLERMELDUNG_CC_BFD_L -> nicht_aktiv FEHLERMELDUNG_CC_BFD_R -> nicht_aktiv RE: E70 LCI Tail lights retrofit : coding ? but how ? - Orphee - 01-07-2022 I don't have it in FRM2 I have : CC_MELDUNG_BFD KALTUEBERWACHUNG_BFD WARMUEBERWACHUNG_BFD CC_MELDUNG_BFD_L CC_MELDUNG_BFD_R I tried to change KALTUEBERWACHUNG_BFD WARMUEBERWACHUNG_BFD To nicht_activ but does change the default on idrive CC_MELDUNG_BFD seems to be for "check control notification" I could try this one RE: E70 LCI Tail lights retrofit : coding ? but how ? - Fatalix - 01-07-2022 Just add +MUEH to vehicle order, and code FRM and CCC/CIC. RE: E70 LCI Tail lights retrofit : coding ? but how ? - Orphee - 01-07-2022 (01-07-2022, 19:07 PM)Fatalix Wrote: Just add +MUEH to vehicle order, and code FRM and CCC/CIC. I did it and coded FA_WRITE in CAS and FRM, but I still had the default in idrive for brake force display. Switching CC_MELDUNG_BFD to nich_activ did the trick. no more default on idrive. Maybe I did not apply/code correctly FRM... I did not play with CCC at all. RE: E70 LCI Tail lights retrofit : coding ? but how ? - jaramillo - 01-07-2022 FA write function does not code...... you need to perform sg codieren, if not, try to update modules RE: E70 LCI Tail lights retrofit : coding ? but how ? - dumitru.o - 01-07-2022 K MUEH MUE_BEL_HECK //Nachruestung / Umruestung Facelift Heckleuchten //NA 161461 add +MUEH to VO and default code the FRM. You should have a FRM3 and not a FRM2 RE: E70 LCI Tail lights retrofit : coding ? but how ? - Orphee - 01-07-2022 (01-07-2022, 20:59 PM)dumitru.o Wrote: K MUEH MUE_BEL_HECK //Nachruestung / Umruestung Facelift Heckleuchten //NA 161461 FRM2_E70.C09 EURO X5 produced 02/2008 I will try to full program/code the car with ISTA-P now +MUEH is added in FA code. |