+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: DAF XF106 Delphi ETC3 Ktag read (/showthread.php?tid=66318)
DAF XF106 Delphi ETC3 Ktag read - alexturbo - 06-07-2022
Hello,
I have an ECU DAF XF106 510 EU6 with Delphi ETC3.
Can I read/write it with Ktag Hyundai Delphi ETC3 P623?
thanks
best regards
RE: DAF XF106 Delphi ETC3 Ktag read - bogdanwmw - 06-07-2022
with ktag clone you want read/write?
RE: DAF XF106 Delphi ETC3 Ktag read - alexturbo - 06-07-2022
(06-07-2022, 11:57 AM)bogdanwmw Wrote: with ktag clone you want read/write?
Yes, with china ktag.
i just got software v2.47 for my kess v2 5.017 eu and now i have xf 106 with plugin 483 will it work with it?
Or KTag European fw8.000 with 2.47?
Unfortunately, my original autotuner and MMS Flex do not support this control unit.
RE: DAF XF106 Delphi ETC3 Ktag read - wajda3 - 11-07-2022
Read write by obd with kess v2 clone without any problem
RE: DAF XF106 Delphi ETC3 Ktag read - alexturbo - 12-07-2022
(11-07-2022, 18:30 PM)wajda3 Wrote: Read write by obd with kess v2 clone without any problem
Reading with Kess EU Clone did without any problems. But now I have problem when writing, not in boot mode keeps getting error "Status change not performed".