+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: Mercedes Benz - Smart (https://cartechnology.co.uk/forumdisplay.php?fid=63)
+---- Thread: Xentro 3.2022 XUSCC help (/showthread.php?tid=66533)
Xentro 3.2022 XUSCC help - vanderferdas - 12-07-2022
Hi guys i finished my fresh installation of Xentry 3.2022 version successfully with advices, patches, etc from the comunity, thanks to all for your work!
Everything is working fine less Xentry Update Services control center, it shows valid start key and green check for servers available, Xus detect release update but no one entry for ecu software available, tried everything i can found on internet (no use old methods offcourse).
I looked to log (attach picture) and problem seems to be getJson: winhttpsendrequest 12007 "the server name or address could not be resolved, any Idea or solution?
Note: i have read ewa-wis conflicts port 9000 so when i installed it modified to force ewa use port 9001.
Note2: i tested port and realize that port 9000 is used by pid 4, system
Note3: sorry, the log is in spanish...
Note4: XusLightVersion":"6.9.0.0"
Thanks in advance and have a nice day!
RE: Xentro 3.2022 XUSCC help - gcs190 - 12-07-2022
Port interference affects the operation of EWAnet, but that is not your problem, I once made a thread about XUS, but that solution is currently obsolete.
RE: Xentro 3.2022 XUSCC help - vanderferdas - 12-07-2022
Thanks for your comments. The port 9000 is used by my system and cant able to let it be free, so after investigate, 9000 is used by XUS for webapi server, and finally i changed the standard 9000 to 9003 (similar for ewa), just change port in json file located programfiles(x86)\Mercedes-Benz Software\XentryUpdateServiceLight\config\ xuslight_webapi_conf.json file, maybe this could help anyone, for me no
So i assume that in present day there is no solution for Xus can download files right?
Thanks again
RE: Xentro 3.2022 XUSCC help - gcs190 - 12-07-2022
Yes, there is but I didn't make it public, too many leeches....
RE: Xentro 3.2022 XUSCC help - liangyupei - 27-07-2022
(12-07-2022, 08:20 AM)vanderferdas Wrote: Hi guys i finished my fresh installation of Xentry 3.2022 version successfully with advices, patches, etc from the comunity, thanks to all for your work!
Everything is working fine less Xentry Update Services control center, it shows valid start key and green check for servers available, Xus detect release update but no one entry for ecu software available, tried everything i can found on internet (no use old methods offcourse).
I looked to log (attach picture) and problem seems to be getJson: winhttpsendrequest 12007 "the server name or address could not be resolved, any Idea or solution?
Note: i have read ewa-wis conflicts port 9000 so when i installed it modified to force ewa use port 9001.
Note2: i tested port and realize that port 9000 is used by pid 4, system
Note3: sorry, the log is in spanish...
Note4: XusLightVersion":"6.9.0.0"
Thanks in advance and have a nice day!
I can help you, send teamviewer to me, please make an appointment with me, I am in China, I can remotely set the time for you at night, please pay attention to the time difference, this is free, and you will not be charged.