CarTechnoloGY
VAS-PC ; Odis Service and ODIS Engineering ; Flash Files English - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55)
+---- Thread: VAS-PC ; Odis Service and ODIS Engineering ; Flash Files English (/showthread.php?tid=6659)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

RE: VAS-PC ; Odis Service and ODIS Engineering ; Flash Files English - floppy2015 - 10-06-2015

O.k thanks have you a Original ODX data for flashing ?

can you shared this database?

RE: VAS-PC ; Odis Service and ODIS Engineering ; Flash Files English - harcan - 20-06-2015

Works fine! thanks!.. =)
installed latest odis-s an osid-e!.. =O)
been away from using odis for a while......when did they drop the auto check of vehicle projects?...
cheers/H

RE: VAS-PC ; Odis Service and ODIS Engineering ; Flash Files English - GTB - 21-06-2015

Hello everyone,

On the internet I read that it should be possible to recover bricked VAG EDC17 ecu , by flashing VAS PC flash files.

I wonder how this is possible, because as fas as I know, the ECU dosnot respond to OBD anymore when it was damaged by flashing wrong file(checksum) in bootmode/OBD.

Does anybody know an answer for this ?

Thank you .

Best regards,

John

RE: VAS-PC ; Odis Service and ODIS Engineering ; Flash Files English - billyleon - 23-06-2015

I know for odis s when i make update for example the ecu 01
If it stop in 40 % or 80% or in 99% then you can
Start update again frim the bigining, i thing only
In new ecu models!!

RE: VAS-PC ; Odis Service and ODIS Engineering ; Flash Files English - floppy2015 - 05-07-2015

Hello,

give it a new Flashdata from erwin ? my Flashdata date is from 28.4.15 or is this the newest data?

Thanks.

RE: VAS-PC ; Odis Service and ODIS Engineering ; Flash Files English - fantomel - 05-07-2015

[Image: 2ylp8g8.jpg]

I hope this answers your question.

RE: VAS-PC ; Odis Service and ODIS Engineering ; Flash Files English - tecnijl - 11-07-2015

Hello,
I have a serious problem, I tried flashing the ECU of my VW GolfV with ODIS-5.0.14 and failed, now the ecu is dead, communicates with odis but does not work in the car, I have the VAS5054 that works very well with diagnosis ODIS-2.2.4, I have not updated the FW, the version that I have is the 1.20.13, I devo update? FW can be the reason for the failure?

best regards.

RE: VAS-PC ; Odis Service and ODIS Engineering ; Flash Files English - Marcos - 11-07-2015

ODIS-E 5.0.14 is using his own firmware so it has nothing to do with your unmodified ODIS-S 2.2.4 firmware.
Have you used a battery charger during the update ?

RE: VAS-PC ; Odis Service and ODIS Engineering ; Flash Files English - tecnijl - 13-07-2015

(11-07-2015, 20:33 PM)Marcos Wrote:  ODIS-E 5.0.14 is using his own firmware so it has nothing to do with your unmodified ODIS-S 2.2.4 firmware.
Have you used a battery charger during the update ?

Yes, I used a charger to 13.5V,
(13-07-2015, 06:33 AM)tecnijl Wrote:  
(11-07-2015, 20:33 PM)Marcos Wrote:  ODIS-E 5.0.14 is using his own firmware so it has nothing to do with your unmodified ODIS-S 2.2.4 firmware.
Have you used a battery charger during the update ?

Yes, I used a charger to 13.5V,


I read that some interface VAS 5054 not serve to flashing, is that correct?
as I can tell if my "vas 5054" is OK to blink?

RE: VAS-PC ; Odis Service and ODIS Engineering ; Flash Files English - Marcos - 13-07-2015

Post some pictures and we will see about yours.
Cheers smile