+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: Help TGFlash SID209 Read/Write/Unlock (/showthread.php?tid=66608)
Help TGFlash SID209 Read/Write/Unlock - reini1976 - 13-07-2022
Hello. I need help with TGFlash with SID209 ECU Ford Ranger 2.2 TDCI
ECU runs with Software version GB3G-14C204-AFK
Virtual Read works.
If i try to read the software from ecu Error message "ECU isn't patched."
TGFlash support wrote that i should write latest calibration.
I downloaded following softwares from Ford.
GB3G-14C204-AFK
GB3G-14C204-AFL
GB3G-14C204-AFM
GB3G-14C204-AFN
Is one of this VBF-Files compatible? How can I write the VBF-File with TG-Flash? With "Back to stock"?
I hope someone can help me.
Thanks in advance
RE: Help TGFlash SID209 Read/Write/Unlock - moriaz - 13-07-2022
you need to perform "Back to stock" with original VBF to return ECU to original state and, after that, start writing with your file
RE: Help TGFlash SID209 Read/Write/Unlock - reini1976 - 13-07-2022
(13-07-2022, 18:50 PM)moriaz Wrote: you need to perform "Back to stock" with original VBF to return ECU to original state and, after that, start writing with your file
Thank you moriaz.
Is the ecu patched after writing the vbf?
Can i read it? Or should I use the virtual read?
Is writing save with TGFlash?
Regards
RE: Help TGFlash SID209 Read/Write/Unlock - reini1976 - 14-07-2022
TGFlash can not write vbf. Ecu is not supportet. Contact support.
Someone can help
RE: Help TGFlash SID209 Read/Write/Unlock - quato79 - 14-07-2022
Unlock ecu with Pcmflash on bench,then read write via obd,dont struggle with tg..
RE: Help TGFlash SID209 Read/Write/Unlock - reini1976 - 14-07-2022
(14-07-2022, 10:15 AM)quato79 Wrote: Unlock ecu with Pcmflash on bench,then read write via obd,dont struggle with tg..
Unlock with Protocol 71 in PCM Flash?
RE: Help TGFlash SID209 Read/Write/Unlock - moriaz - 14-07-2022
post file maybe some one can convert to bin