+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Solved ✔ Bmw e90 Frm control reversed after eeprom/repair (/showthread.php?tid=66709)
Bmw e90 Frm control reversed after eeprom/repair - mihaiti - 16-07-2022
Hello, i have tried to repair a from module first with upa then with xprog!
With xprog i have suceeded to write the eeprom but with control reversed (windows/hibeam/lowbeam/turnsignals blink fast)!
I have attached both set of files dflash with eeprom!
Can someone check where is the problem?
RE: Bmw e90 Frm control reversed after eeprom/repair - foxportal - 16-07-2022
The number on the control unit is indicated, write it here. You will be given a dump. Write it down. flash and code the car. That's all.
RE: Bmw e90 Frm control reversed after eeprom/repair - mihaiti - 16-07-2022
here it is:
S:6135 9240530 -01
AW:9240536
sw:132001
hw:07
RE: Bmw e90 Frm control reversed after eeprom/repair - Red_Mango - 16-07-2022
look your eeprom is ok repaired,just do coding and this will solve your issue
RE: Bmw e90 Frm control reversed after eeprom/repair - seenomore - 16-07-2022
Just need a simple code with a .man empty in ncs expert
RE: Bmw e90 Frm control reversed after eeprom/repair - mihaiti - 17-07-2022
Solved, i wrote down the eeprom from upa and all works now!