ISTA 4.36.14 offline - Automatic encoding data record calculation failed - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: ISTA 4.36.14 offline - Automatic encoding data record calculation failed (/showthread.php?tid=66800) |
ISTA 4.36.14 offline - Automatic encoding data record calculation failed - tintoverano - 19-07-2022 hi, using 4.36.14 I ran into this dialog and couldn't continue with programming the car this comes up after accepting the Measure Plan what could be the problem? thanks! RE: ISTA 4.36.14 offline - Automatic encoding data record calculation failed - Elf11 - 19-07-2022 (19-07-2022, 06:58 AM)tintoverano Wrote: hi, Secure coding issue, what car is it? SP21? Check release notes for more information RE: ISTA 4.36.14 offline - Automatic encoding data record calculation failed - tintoverano - 19-07-2022 the car is a 1'/F20/SHA/118D/N47/MECH/ECE/LL/2011-11-01 what is SP21? thanks RE: ISTA 4.36.14 offline - Automatic encoding data record calculation failed - Node - 19-07-2022 Are you using standalone or do you use fake license? RE: ISTA 4.36.14 offline - Automatic encoding data record calculation failed - tintoverano - 19-07-2022 (19-07-2022, 10:30 AM)Node Wrote: Are you using standalone or do you use fake license? the standalone from Sedoy RE: ISTA 4.36.14 offline - Automatic encoding data record calculation failed - diagso - 19-07-2022 Well this get's me thinking if we should break those issues with coding into two separate roadblocks: 1. Coding 2.0 and signing keys for SP21 cars for coding 2. Programing token for enabling programing via ISTA I got nothing to back it up outside my gut feeling. RE: ISTA 4.36.14 offline - Automatic encoding data record calculation failed - Node - 19-07-2022 My guess is you did not have internet connection on that computer at the time? Even it's offline, ISTA is very picky when it can't even find gateway and/or resolve addresses through DNS. I just flashed G30 with the same version couple of days ago and had no problems whatsoever. But my computer was connected to the internet. So if all G30 keys are there it would be very strange if F20 keys are suddenly not there. Either that or your PSdZ data is broken. RE: ISTA 4.36.14 offline - Automatic encoding data record calculation failed - tintoverano - 19-07-2022 (19-07-2022, 12:21 PM)Node Wrote: My guess is you did not have internet connection on that computer at the time? Even it's offline, ISTA is very picky when it can't even find gateway and/or resolve addresses through DNS. I had internet on the computer I'll do complete reinstall and check again thanks! RE: ISTA 4.36.14 offline - Automatic encoding data record calculation failed - Node - 19-07-2022 If you continue having problems you should post here FA and SVT of the car read by ESys. To see what is going on. |