+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: anti-trap failure on center screen E90 3x (/showthread.php?tid=66981)
Pages:
1
2
anti-trap failure on center screen E90 3x - RDSO94106 - 23-07-2022
hello can someone help me I need to disable the anti-trap of an E90 3x with armored glass. it is possible to disable with programming or coding thanks.
RE: anti-trap failure on center screen E90 3x - szilagyilajos - 25-07-2022
Normalize the windows in ISTA Function
RE: anti-trap failure on center screen E90 3x - Hoborg - 25-07-2022
(25-07-2022, 07:08 AM)szilagyilajos Wrote: Normalize the windows in ISTA Function
I think you misunderstood the question
RE: anti-trap failure on center screen E90 3x - willisodhiambo - 26-07-2022
Denormalise it instead. I think if you reprogramme FRM window will be denormalised.
RE: anti-trap failure on center screen E90 3x - ____ANGEL___ - 26-07-2022
if frm2/3 (frm70.prg) use this job STEUERN_FENSTERHEBER_DENORMIEREN with 0x40 as argument
if frm1 (frm87.prg) use this job steuern_fensterheber_denormieren with 0x03 as argument
cheers
RE: anti-trap failure on center screen E90 3x - RDSO94106 - 26-07-2022
OK I WILL DO THAT AND COME BACK WITH RESULTS HERE
RE: anti-trap failure on center screen E90 3x - ROD-BENDERS - 26-07-2022
Watch those fingers
RE: anti-trap failure on center screen E90 3x - RDSO94106 - 26-07-2022
(26-07-2022, 17:50 PM)ROD-BENDERS Wrote: Watch those fingers
yes, armored glass and the anti-trap no longer works. and just to clear the lcd and ipc fault but i will be careful with that
RE: anti-trap failure on center screen E90 3x - RDSO94106 - 27-08-2022
(26-07-2022, 14:14 PM)____ANGEL___ Wrote: if frm2/3 (frm70.prg) use this job STEUERN_FENSTERHEBER_DENORMIEREN with 0x40 as argument
if frm1 (frm87.prg) use this job steuern_fensterheber_denormieren with 0x03 as argument
cheers
hello everyone I tried to do this but I didn't find the options I did it with bimmercode in expert mode and with ncsexpert but I can't find it STEUERN_FENSTERHEBER_DENORMIEREN can anyone help me how to find this option and which program I need to use
RE: anti-trap failure on center screen E90 3x - stecom90 - 27-08-2022
Use Tool32 to do it