+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: AIRBAG (https://cartechnology.co.uk/forumdisplay.php?fid=13)
+--- Thread: VW Sharan Airbag clockspring (/showthread.php?tid=67101)
VW Sharan Airbag clockspring - Lmqcatarino - 27-07-2022
I'm a locksmith guy, but this is from my car.
The airbag clockspring broke and I had to buy it from online store, because VAG don't have stock.
Part number is the same: 5K0953569AL
Airbag error is gone, horn works now and steering buttons, but still have some error and cruise control don't work.
DTC:
Steering column
U112100 - databus missing message
B114411 - Turn Signal Switch
B114913 - Windshield Wiper/Washer Switch
Engine control module
P164700 - Check Coding of ECUs on Powertrain Data Bus
P056800 - Cruise Control Switch
After some Google about this DTC I get it should be a coding issue from the clockspring I exchange.
The only solution is to mount back the old module and read the coding or I can get that coding somewhere?
Thanks
RE: VW Sharan Airbag clockspring - Gietek1 - 27-07-2022
"The only solution is to mount back the old module and read the coding or I can get that coding somewhere?
Thanks"
Yes that is solution , or change only clockspring without module.
RE: VW Sharan Airbag clockspring - Lmqcatarino - 27-07-2022
(27-07-2022, 08:54 AM)Gietek1 Wrote: "The only solution is to mount back the old module and read the coding or I can get that coding somewhere?
Thanks"
Yes that is solution , or change only clockspring without module.
OK. I will do it.
But, for example, ABS coding is possible to get just by vin / label right?
(27-07-2022, 08:54 AM)Gietek1 Wrote: "The only solution is to mount back the old module and read the coding or I can get that coding somewhere?
Thanks"
Yes that is solution , or change only clockspring without module.
OK. I will do it.
But, for example, ABS coding is possible to get just by vin / label right?