+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: G30 start/stop off in ecopro? (/showthread.php?tid=67189)
G30 start/stop off in ecopro? - Spirit5676 - 28-07-2022
The title pretty much says it all is it possible to code G30 start/stop off in ecopro? Coding tcm_msa_memory remembers last setting in comfort, but not in ecopro.
RE: G30 start/stop off in ecopro? - StarmanBL - 28-07-2022
Did you try
Engine OFF, ignition switch is ON, (Diagnostic mode) key fob is in the car
I would code start in Eco Pro, after TCM_MSA_MEMORY
Wert should be set to Wert_01 and Werte=01.... that should solve problem, I think
RE: G30 start/stop off in ecopro? - Node - 28-07-2022
Isn't the whole point of EcoPro to save fuel as much as possible??? And now you want to disable fuel saving measure
RE: G30 start/stop off in ecopro? - Spirit5676 - 28-07-2022
(28-07-2022, 20:28 PM)StarmanBL Wrote: Did you try
Engine OFF, ignition switch is ON, (Diagnostic mode) key fob is in the car
I would code start in Eco Pro, after TCM_MSA_MEMORY
Wert should be set to Wert_01 and Werte=01.... that should solve problem, I think
Did a little googling and seems to be possible to code ASS off in ecopro with some F-series, would like to know if this can be coded in G-series aswell.
(28-07-2022, 20:33 PM)Node Wrote: Isn't the whole point of EcoPro to save fuel as much as possible??? And now you want to disable fuel saving measure
Sure, but since BMW stopped using lead in bearings the bearings won't last as many starts as they used to, which is not a good combination with ASS. In a city you can get several starts in a kilometer with ASS.
RE: G30 start/stop off in ecopro? - thanhphan1004 - 29-07-2022
i think imposiba from ECO ,
RE: G30 start/stop off in ecopro? - Alive006 - 22-10-2022
hi. Send BDC CAFD
RE: G30 start/stop off in ecopro? - G1DRO - 23-10-2022
Hi. Try to code HU - “ECO_CONF_MSA”, it’s add a checkbox in eco settings