+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: Mercedes Benz - Smart (https://cartechnology.co.uk/forumdisplay.php?fid=63)
+---- Thread: Solved ✔ 2013 Mercedes GL550 DTC P24D628 (/showthread.php?tid=67306)
2013 Mercedes GL550 DTC P24D628 - Moeowaisi - 02-08-2022
Hello!
I have 2013 Mercedes GL550, Fault code (P24D628: pressure sensor/pressure switch 2 for the evaporative emission (EVAP) control system is faulty. the signal offset is out of the permissible rang.) My tech replaced the tank pressure sensor and still the same, performed vacuum leak test and closed the canister valve didn't found any leak the reading value of the fuel tank pressure its between
0 to -048 Please help
thanks.
RE: 2013 Mercedes GL550 DTC P24D628 - loki954 - 02-08-2022
need to post a file to make this work
RE: 2013 Mercedes GL550 DTC P24D628 - MBENZTECH - 07-08-2022
Perform the fuel leak down test with Xentry. This codes is for a malfunction of the sensor not a leak of the evap system. So performing leak tests will not help in resolving the issue.
RE: 2013 Mercedes GL550 DTC P24D628 - Moeowaisi - 07-08-2022
It's fixed the purging pressure sensor was defective I replaced it and it's work fine