E-Sys in Batch Mode (CLI) - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: E-Sys in Batch Mode (CLI) (/showthread.php?tid=67721) |
E-Sys in Batch Mode (CLI) - Fahim - 12-08-2022 This is nothing comprehensive, I have quickly put this together. This is for E-Sys 3.40.2 Using PSdZData 4.36.31 if I'm not mistaken for different PSdZData you will need to create files. If you need help post below. This allows you to use E-Sys in batch mode rather than GUI which is a lot quicker. I have only created the file for F020 I have attached documentation so you can start creating your own files. READ THE README FILE. If you have any questions post below. Don't PM me. leave a thanks and rep EDIT: documentation is now up RE: E-Sys in Batch Mode (CLI) - hashtagmaster - 13-08-2022 All this is also in the ESYS HELP at the top of the menu I've converted all of the help to PDF |