+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: Renault - Dacia - Nissan - Infiniti (https://cartechnology.co.uk/forumdisplay.php?fid=57)
+---- Thread: Laguna 2 1.9dci ECU not recognise problem (/showthread.php?tid=68072)
Laguna 2 1.9dci ECU not recognise problem - galisdoo - 23-08-2022
Hi to all,
I have problem Laguna 2 1.9DCI no comunicate with ECU Boch, other module is ok, car crank but not start. I try read with can clip, renolink, ddt4all always same. Swap with used ,from another car ECU, UCH, Card, only steering lock fill with FF. Same situation, Check fuse all ok any idea. I have gnd and +12 E3.
Best regards
RE: Laguna 2 1.9dci ECU not recognise problem - busu - 23-08-2022
Hello Friend !
you checked that you don't have a problem on the column steering?
RE: Laguna 2 1.9dci ECU not recognise problem - galisdoo - 25-08-2022
(23-08-2022, 09:50 AM)busu Wrote: Hello Friend !
you checked that you don't have a problem on the column steering?
Lock and unlock work, looks fine, but no comunicate with ECU, no K line etc, Any wiring diagram for check K line from odb or uch to ECM.
BR