CarTechnoloGY
PLA 3.0 parametrization file - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55)
+---- Thread: PLA 3.0 parametrization file (/showthread.php?tid=68088)

Pages: 1 2


PLA 3.0 parametrization file - david99 - 23-08-2022

Hi All,

Could somebody provide me parametrization files for PLA3.0 for the following ECUs:?

3Q0919298B

and

3Q0919298E

I would like to upgrade mine B to version E.

Thanks,

David


RE: PLA 3.0 parametrization file - umbralui - 23-08-2022

Hope it helpsĀ yes


RE: PLA 3.0 parametrization file - david99 - 24-08-2022

Those are Flash files I have those. I need parametrization files as well as parametrization will fly off after flash do you have those as well? For Tiguan 2017

Thanks.

David


RE: PLA 3.0 parametrization file - greenhorn - 24-08-2022

(24-08-2022, 04:44 AM)david99 Wrote:  Could it be used in both revision B and E and on Tiguan 2017? Thanks.

Use the one according your software version and bumper type - there are dataset for nomal, offroad or Rline bumper.


RE: PLA 3.0 parametrization file - david99 - 24-08-2022

(24-08-2022, 04:49 AM)greenhorn Wrote:  
(24-08-2022, 04:44 AM)david99 Wrote:  Could it be used in both revision B and E and on Tiguan 2017? Thanks.

Use the one according your software version and bumper type - there are dataset for nomal, offroad or Rline bumper.

Hi I have Rline bumper, could you please point me where to find those datasets? Those posted above were flashfiles not datasets.

Thanks,

David


RE: PLA 3.0 parametrization file - spacewalker - 24-08-2022

have you look into VCP ?


RE: PLA 3.0 parametrization file - david99 - 24-08-2022

(24-08-2022, 05:14 AM)spacewalker Wrote:  have you look into VCP ?

NO I do not have VCP only VCDS and ODIS without online.


RE: PLA 3.0 parametrization file - Versus - 24-08-2022

Tiguan PLA dataset


RE: PLA 3.0 parametrization file - david99 - 24-08-2022

(24-08-2022, 05:51 AM)Versus Wrote:  Tiguan PLA dataset

This dataset is for Rline bumper? Is it applicable for both revision B - SW 0029 and revision E - SW 0046?

Thanks,


RE: PLA 3.0 parametrization file - david99 - 26-08-2022

Could anybody advice regarding parametrization file? Is there specific file for Rline needed? As I see only one dataset file.

And also was already anybody doing update from 3Q0919298B SW 0029 to 3Q0919298E SW 0046?