CarTechnoloGY
Replace defective entrynav2 BMW F48 1/2020 - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Replace defective entrynav2 BMW F48 1/2020 (/showthread.php?tid=68113)



Replace defective entrynav2 BMW F48 1/2020 - mateos - 24-08-2022

Hello,

my entrynav2 from X48 (1/2020) is defective (CID connector is defective).
If I install a used entrynav2 and then proceed as follows: 
- change VIN 
- coding
- delete old FSC (tool32, dev_uds.prg -> "hu_delete_persistency_new")
- install FSC (rep. FSC I already have)
Will it work like this or can it be that the entrynav2 blocks (component protection)?

Thanks


RE: Replace defective entrynav2 BMW F48 1/2020 - elthox - 24-08-2022

Will need bench work.


RE: Replace defective entrynav2 BMW F48 1/2020 - Thorsten - 24-08-2022

HI,

if you are doing it not on bench (lik elthox wrote), you will get the component protection active.


Thorsten


RE: Replace defective entrynav2 BMW F48 1/2020 - mateos - 24-08-2022

Thank you for your answers.
Unfortunately I do not have a bench
Can someone empty my entrynav (I live in Germany)?

I have another question. I had a similar problem a few years ago, but with EVO. It worked wonderfully then. Why doesn't it work with entrynav2?

Thank you


RE: Replace defective entrynav2 BMW F48 1/2020 - Wibbles - 24-08-2022

(24-08-2022, 10:18 AM)mateos Wrote:  Thank you for your answers.
Unfortunately I do not have a bench
Can someone empty my entrynav (I live in Germany)?

I have another question. I had a similar problem a few years ago, but with EVO. It worked wonderfully then. Why doesn't it work with entrynav2?

Thank you

it's different on X1 because of BDC where as bench is usually ZGW.


RE: Replace defective entrynav2 BMW F48 1/2020 - mateos - 24-08-2022

on the vehicle was also BDC and not ZGW.
What is the reason that sometimes the unit is blocked (component protection) and sometimes not?


RE: Replace defective entrynav2 BMW F48 1/2020 - Freddy1 - 24-08-2022

(24-08-2022, 09:29 AM)Thorsten Wrote:  HI,

if you are doing it not on bench (lik elthox wrote), you will get the component protection active.


Thorsten

Not always, I had the luck to get two entrevo units "virgin", on bench with ZGW, but I did the coding in car, only virginize and insert new FSCs with tool32/esys.

Depends on you from in Germany, I could try to help out. But there´s always a really big chance CP kicks in.


RE: Replace defective entrynav2 BMW F48 1/2020 - BugFix - 24-08-2022

Have to just turn OFF the component protection


RE: Replace defective entrynav2 BMW F48 1/2020 - larshutten - 25-08-2022

(24-08-2022, 21:56 PM)BugFix Wrote:  Have to just turn OFF the component protection

Last time I asked you about it I got exactly zero reply. I don’t want to offend you but are you sure you can do it?


RE: Replace defective entrynav2 BMW F48 1/2020 - Freddy1 - 25-08-2022

I guess he offers it, but won´t tell a price in public? But I´m interested in this as well, I have a few HUs with CP lying around