+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: G20 US > ECE converion (/showthread.php?tid=68216)
G20 US > ECE converion - zygi898 - 26-08-2022
Hello, i have g20 from US in europe, in F series i have change language but here i fdl code kombii to master language and add to list in MGU but no luck. I hear that need to change typecode to ece and flash MGU? Is it safe option?
Second thing is to separete brake light from rear turn sigrnal, for that is need some FDL coding also? Or code with ECE typecode?
RE: G20 US > ECE converion - Rudkinp - 26-08-2022
Yes, you have to flash MGU with EU VO.
Turn signals - need to make new wirings and code bdc - fdl or with EU VO
RE: G20 US > ECE converion - zygi898 - 26-08-2022
Can anything go wrong while flashing MGU with eu type and BDC with eu type? Or better to fdl code, but I don't know which lines
RE: G20 US > ECE converion - marcdts - 26-08-2022
(26-08-2022, 08:31 AM)zygi898 Wrote: Hello, i have g20 from US in europe, in F series i have change language but here i fdl code kombii to master language and add to list in MGU but no luck. I hear that need to change typecode to ece and flash MGU? Is it safe option?
Second thing is to separete brake light from rear turn sigrnal, for that is need some FDL coding also? Or code with ECE typecode?
changing language no need flash , just finished Reg Change on two G22 s /no problem.
RE: G20 US > ECE converion - zygi898 - 26-08-2022
(26-08-2022, 09:11 AM) marcdts Wrote: changing language no need flash , just finished Reg Change on two G22 s /no problem.
So what shoult i code?
RE: G20 US > ECE converion - Node - 26-08-2022
IF you would JUST use SEARCH on this forum you would already find a solution:
https://cartechnology.co.uk/showthread.php?tid=63802
Older MGU software versions has all languages inside at once, newer ones just don't have (can't fit?) all of them at the same time.
RE: G20 US > ECE converion - zygi898 - 26-08-2022
I have search but for G20 instead of MGU.. So i'll flash HU with changed type to ece and set master language in kombi to uk or any i want?
RE: G20 US > ECE converion - Thorsten - 26-08-2022
(26-08-2022, 09:11 AM)marcdts Wrote:(26-08-2022, 08:31 AM)zygi898 Wrote: Hello, i have g20 from US in europe, in F series i have change language but here i fdl code kombii to master language and add to list in MGU but no luck. I hear that need to change typecode to ece and flash MGU? Is it safe option?
Second thing is to separete brake light from rear turn sigrnal, for that is need some FDL coding also? Or code with ECE typecode?
changing language no need flash , just finished Reg Change on two G22 s /no problem.
HI,
right for older iSteps, but on latest iSteps (no idea when it started) it is needed to flash MGU to have voice output.
Thorsten
RE: G20 US > ECE converion - zygi898 - 26-08-2022
How long can take flashing MGU with enet cable?
RE: G20 US > ECE converion - spark - 26-08-2022
(26-08-2022, 13:30 PM)zygi898 Wrote: How long can take flashing MGU with enet cable?
~45 min.