![]() |
F10 NBT Flash - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: F10 NBT Flash (/showthread.php?tid=69090) Pages:
1
2
|
F10 NBT Flash - bmwtech - 17-09-2022 Hi, can somebody remote flash NBT? or watch why my NBT do not want to flash !!! THX RE: F10 NBT Flash - Bagum4uk - 17-09-2022 (17-09-2022, 18:42 PM)bmwtech Wrote: Hi, You flash it with iCom or Enet cable? RE: F10 NBT Flash - bmwtech - 17-09-2022 (17-09-2022, 19:09 PM)Bagum4uk Wrote:(17-09-2022, 18:42 PM)bmwtech Wrote: Hi, Enet, Icom don't have in this moment RE: F10 NBT Flash - Qwerti - 17-09-2022 (17-09-2022, 18:42 PM)bmwtech Wrote: Hi, Hello, You flash it in car or bench? RE: F10 NBT Flash - bmwtech - 17-09-2022 (17-09-2022, 19:29 PM)Qwerti Wrote:(17-09-2022, 18:42 PM)bmwtech Wrote: Hi, in car RE: F10 NBT Flash - Bagum4uk - 17-09-2022 (17-09-2022, 19:35 PM)bmwtech Wrote:(17-09-2022, 19:29 PM)Qwerti Wrote:(17-09-2022, 18:42 PM)bmwtech Wrote: Hi, Please share yours log, what do you have there! RE: F10 NBT Flash - bmwtech - 17-09-2022 ------------------------------ ping 169.254.199.99 is fine ------------------------------ TAL execution started. VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197] ExecutionID=2022/09/17-17:35:43.960 [] prepareTALExecution started [] prepareTALExecution finished [] prepareVehicleForFlash started [] prepareVehicleForFlash finished [HU_NBT - 63] prepareECUforBLUpdate started MCDDiagService<id=14900, job=com.bmw.psdz.jobs.uds.hu.MCD3_PrepareECUforBLUpdate, service=SA_RSD - SecurityAccessRequestSeed, description=error: timeout, link=HU_NBT_63_ETHERNET_63> MCDDiagService<id=14900, job=com.bmw.psdz.jobs.uds.hu.MCD3_PrepareECUforBLUpdate, service=SA_RSD - SecurityAccessRequestSeed, description=error: timeout, link=HU_NBT_63_ETHERNET_63> MCDDiagService<id=14900, job=com.bmw.psdz.jobs.uds.hu.MCD3_PrepareECUforBLUpdate, service=SA_RSD - SecurityAccessRequestSeed, description=error: timeout, link=HU_NBT_63_ETHERNET_63> [HU_NBT - 63] prepareECUforBLUpdate finished [HU_NBT - 63] There was an error during TAL execution, please check the log files. [HU_NBT - 63] - [Exception - HU_NBT - 63] negative response error: code: cancel ecu requires finalize description: P2 timeout on Service SA_RSD has error in result: [Severity=2051][ErrorCode=58640][ErrorCodeDescription=resource not available][VendorCode=2142][VendorCodeDescription=P2 timeout occured]; LinkName: HU_NBT_63_ETHERNET_63 severity: ERROR RE: F10 NBT Flash - DEJMIEN - 17-09-2022 With SA_RSD only on the bench it can be fixed. Why do you want to update? RE: F10 NBT Flash - bmwtech - 17-09-2022 (17-09-2022, 22:06 PM)DEJMIEN Wrote: With SA_RSD only on the bench it can be fixed. Can you explain to me how to do it ? (17-09-2022, 22:06 PM)DEJMIEN Wrote: Why do you want to update? Previously the nbt was retrofitted and crooked activated, I want to flashit and new codes to activate nbt and tcb... RE: F10 NBT Flash - jararak - 18-09-2022 fsc can be cleared and installed anyway without flashing, maybe better solution for you at moment bench - zgw, some unit which will send power on (arduino, or some different emulator), than network cable, power supply |