+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: AIRBAG (https://cartechnology.co.uk/forumdisplay.php?fid=13)
+--- Thread: Clear Crash Data Volvo XC2361 (/showthread.php?tid=69212)
Clear Crash Data Volvo XC2361 - JorBo - 20-09-2022
Hi !
I have this unit P31387534 with XC2361-72F mcu.
I need to clear the crash data. Tested other solution but the DTCs U3000 appear after make the clear data.
Anyone could support me with a correct file ?
I would appreciate it!
Thanks
RE: Clear Crash Data Volvo XC2361 - Waliduk - 20-09-2022
(20-09-2022, 22:24 PM)JorBo Wrote: Hi !
I have this unit P31387534 with XC2361-72F mcu.
I need to clear the crash data. Tested other solution but the DTCs U3000 appear after make the clear data.
Anyone could support me with a correct file ?
I would appreciate it!
Thanks
write the crash dump back to the module and check if you get U3000 Fault code
if yes then you have a corrupted Crash dump
RE: Clear Crash Data Volvo XC2361 - superjet - 21-09-2022
Try this one,report back
RE: Clear Crash Data Volvo XC2361 - JorBo - 21-09-2022
Thanks for the support. After write your eeprom, no crash data detected and no dtc U3000, only left this code, marked red to be sure if is normal or need to delete it.
Thanks !
RE: Clear Crash Data Volvo XC2361 - superjet - 21-09-2022
because you test on bench no install on car.all dtc is show
RE: Clear Crash Data Volvo XC2361 - JorBo - 22-09-2022
(21-09-2022, 02:39 AM)superjet Wrote: Try this one,report back
With this eeprom not have communication with the control unit.
Regards
RE: Clear Crash Data Volvo XC2361 - superjet - 23-09-2022
(22-09-2022, 22:38 PM)JorBo Wrote:(21-09-2022, 02:39 AM)superjet Wrote: Try this one,report back
With this eeprom not have communication with the control unit.
Regards
Your module wireline have probem.you test on bench have read dtc,module is good
RE: Clear Crash Data Volvo XC2361 - JorBo - 23-09-2022
(23-09-2022, 00:32 AM)superjet Wrote:(22-09-2022, 22:38 PM)JorBo Wrote:(21-09-2022, 02:39 AM)superjet Wrote: Try this one,report back
With this eeprom not have communication with the control unit.
Regards
Your module wireline have probem.you test on bench have read dtc,module is good
OK. THanks for the support.
With the ori eeprom have communication with the car. Strange
