CAS3++ died during programing - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: CAS3++ died during programing (/showthread.php?tid=69278) |
CAS3++ died during programing - matiz - 22-09-2022 Hi, I need pflash for this eeprom cas3++ 6135 9147195. CAS died during programming. I tried several pflash files but withot success. Maybe the eeprom is damaged ? CAS is probably programmed ISTA P version 53. Can you help me, please? RE: CAS3++ died during programing - brag288 - 22-09-2022 hi,did it die during winkfp/ista programming? Or did u try downgrade for key programming? RE: CAS3++ died during programing - 16eddi67 - 22-09-2022 eeprom corupt paf end daf erased . BR EDDY RE: CAS3++ died during programing - ____ANGEL___ - 22-09-2022 true, from 0xf40 to 0xf80 all empty, also other small datas lost.... upload flash, maybe better to check all RE: CAS3++ died during programing - ShermanBG - 22-09-2022 (22-09-2022, 12:33 PM)matiz Wrote: Hi, May I guess that you flashed E90/91/92/93 CAS with WinKFP. Happened to me several times when I flash E9x CAS with WinKFP with E89 daten it dies everytime. Flash it with E60 daten and you will bring it back to live Thank me later RE: CAS3++ died during programing - matiz - 23-09-2022 This is not my job. I would make a backup first... A colleague lost his key, downgrade CAS, added key, car work, again programing CAS and CAS KO. Programming winkfp with this eeprom is not possible. CAS not responding, dead. RE: CAS3++ died during programing - mdomel - 23-09-2022 CAS programming in WINKFP must be done with the ignition off. RE: CAS3++ died during programing - BMWzone - 23-09-2022 (22-09-2022, 20:50 PM)ShermanBG Wrote:(22-09-2022, 12:33 PM)matiz Wrote: Hi, It's strange but in Comfort Mode and Latest SPDaten start Flash in CAS3+ on E89x with 9395657, this is an E60's ZB Number, obvious that flash fail, really in CAS3.HIS it's new ZB Number of 9398115, anyway ISTA\P flash 9389115 in E89x RE: CAS3++ died during programing - ____ANGEL___ - 23-09-2022 1 Cas flashing is without keys 2 Update in kfp is never to be used if you don't know how kfp works. 3 In E89 ecu family all is working good, no any cas kill. edit: 4 If you want to recover a wrong cas flash with kfp, you've to wake up cas manually, opening a door or activating emergency lights (4 turn signs) or whatever wake up the car manually... then flash it with correct zb. |