+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: BSI Cloning with smok uhds possible? (/showthread.php?tid=69402)
BSI Cloning with smok uhds possible? - Lifestyle - 25-09-2022
i want to clone bsi 2004 H05 JC
connected faulty bsi with smok uhds on bench via pinout and made flash and eeprom backup
transfered both files to another bsi 2004 H05 JC
now cloned bsi working i can connect with diag but i noticed that software signature remains same and it didnt changed from original bsi
flash file readed by smok uhds is 512kb size
then i read flash with svci2020 and flash size is 544kb
svci read is 32kb larger then smok uhds file
smok uhds cannot be used for full bsi cloning??
maybe this bsi will work good on car i will try but in situation like this software signature is obviously not transfered and will be wrong for future work with bsi cloned with smok tool becouse flash files are very different
RE: BSI Cloning with smok uhds possible? - decode_cz - 25-09-2022
Smok and X-tool use only another format file than AVDI/SVCI/FVDI
But readed data are the same