+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Xprog reflash to 5.51 atmega (/showthread.php?tid=6980)
RE: Xprog reflash to 5.51 atmega - elioc9 - 06-02-2023
anyone could help me to downgrade the xprog 5.55 to 5.51 with vvdi prog? thanks
RE: Xprog reflash to 5.51 atmega - al70 - 11-05-2023
Has anyone solved device silent when reading MCU, micronas specifically, eeprom read and write / verify perfect but always device silent when read MCU, I've installed new atmega, reflashed with 5.51 but still same, maybe there's work to be done on the PCB to read MCU correct ? Cheers
RE: Xprog reflash to 5.51 atmega - ProjectBMW - 03-06-2023
I don't have TL866 programmer, but I have bios programmer, wondering if this would do the job of flashing atmega?
RE: Xprog reflash to 5.51 atmega - al70 - 03-06-2023
Got it sorted mate, new atmega chip and reflashed fine, with tl866, no problems
RE: Xprog reflash to 5.51 atmega - al70 - 03-06-2023
(03-06-2023, 19:22 PM)ProjectBMW Wrote: I don't have TL866 programmer, but I have bios programmer, wondering if this would do the job of flashing atmega?
Sorry, I didn't read your question properly, I'm not sure, what programmer do you have ?
RE: Xprog reflash to 5.51 atmega - ProjectBMW - 03-06-2023
(03-06-2023, 20:37 PM)al70 Wrote:(03-06-2023, 19:22 PM)ProjectBMW Wrote: I don't have TL866 programmer, but I have bios programmer, wondering if this would do the job of flashing atmega?
Sorry, I didn't read your question properly, I'm not sure, what programmer do you have ?
Hi, Please see attached photo, not sure what is correct name for this device. Just wondering if possible to do this job? If not what are other options?
RE: Xprog reflash to 5.51 atmega - domelec - 03-06-2023
(03-06-2023, 21:43 PM)ProjectBMW Wrote:(03-06-2023, 20:37 PM)al70 Wrote:(03-06-2023, 19:22 PM)ProjectBMW Wrote: I don't have TL866 programmer, but I have bios programmer, wondering if this would do the job of flashing atmega?
Sorry, I didn't read your question properly, I'm not sure, what programmer do you have ?
Hi, Please see attached photo, not sure what is correct name for this device. Just wondering if possible to do this job? If not what are other options?
it is ch431A
RE: Xprog reflash to 5.51 atmega - ProjectBMW - 04-06-2023
(03-06-2023, 22:30 PM)domelec Wrote:(03-06-2023, 21:43 PM)ProjectBMW Wrote:(03-06-2023, 20:37 PM)al70 Wrote:(03-06-2023, 19:22 PM)ProjectBMW Wrote: I don't have TL866 programmer, but I have bios programmer, wondering if this would do the job of flashing atmega?
Sorry, I didn't read your question properly, I'm not sure, what programmer do you have ?
Hi, Please see attached photo, not sure what is correct name for this device. Just wondering if possible to do this job? If not what are other options?
it is ch431A
Possible to flash xprog firmware with this?
RE: Xprog reflash to 5.51 atmega - al70 - 04-06-2023
No, ch341a won't read atmega, if you're on a budget, this will do you
RE: Xprog reflash to 5.51 atmega - domelec - 04-06-2023
(04-06-2023, 00:00 AM)ProjectBMW Wrote:(03-06-2023, 22:30 PM)domelec Wrote:(03-06-2023, 21:43 PM)ProjectBMW Wrote:(03-06-2023, 20:37 PM)al70 Wrote:(03-06-2023, 19:22 PM)ProjectBMW Wrote: I don't have TL866 programmer, but I have bios programmer, wondering if this would do the job of flashing atmega?
Sorry, I didn't read your question properly, I'm not sure, what programmer do you have ?
Hi, Please see attached photo, not sure what is correct name for this device. Just wondering if possible to do this job? If not what are other options?
it is ch431A
Possible to flash xprog firmware with this?
sorry forgot to say no it wont do atmega64