Fiat Multiecuscan v2.2 Full Registered - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: Fiat - Alfa Romeo (https://cartechnology.co.uk/forumdisplay.php?fid=82) +---- Thread: Fiat Multiecuscan v2.2 Full Registered (/showthread.php?tid=7005) |
Fiat Multiecuscan v2.2 Full Registered - obdstart - 14-05-2015 Hi all... Here is Fiat Multiecuscan v2.2 Full Registered For unpack files use WINRAR v5.xx Password: mes22 If you think that my post useful pleas push reputation and thanks buttons. Thanks & Enjoy ... RE: Fiat Multiecuscan v2.2 Full Registered - atomantmk - 01-08-2015 Version 2.6 is out. Sent from my HTC One M9 using Tapatalk RE: Fiat Multiecuscan v2.2 Full Registered - obdstart - 05-08-2015 Yes, but no keygen.. RE: Fiat Multiecuscan v2.2 Full Registered - dndssc - 04-09-2015 Thank you!! This is the best solution for fiat/alfa/lancia for remove belt buzzer, enable cruise control, fog-light, etc.! only a cheap elm327 with adapters required RE: Fiat Multiecuscan v2.2 Full Registered - rs@chip - 25-09-2015 Hello guys..how to configure this softwere with some other k-can interface?I usualy not work with fiat but right now I have to code injectors on lancia phedra and dont have any oem fiat tester..thanks RE: Fiat Multiecuscan v2.2 Full Registered - mladen76 - 25-09-2015 (25-09-2015, 13:13 PM)alex.eobd2 Wrote: Hello guys..how to configure this softwere with some other k-can interface?I usualy not work with fiat but right now I have to code injectors on lancia phedra and dont have any oem fiat tester..thanks What other interface, can you be more specific? RE: Fiat Multiecuscan v2.2 Full Registered - kingauto - 25-09-2015 (25-09-2015, 13:13 PM)alex.eobd2 Wrote: Hello guys..how to configure this softwere with some other k-can interface?I usualy not work with fiat but right now I have to code injectors on lancia phedra and dont have any oem fiat tester..thanks Reference RE: Fiat Multiecuscan v2.2 Full Registered - paro44 - 28-09-2015 (25-09-2015, 13:13 PM)alex.eobd2 Wrote: Hello guys..how to configure this softwere with some other k-can interface?I usualy not work with fiat but right now I have to code injectors on lancia phedra and dont have any oem fiat tester..thanks You can work with: kkl and elm cable with adapters or cantiecar interface See Multiecuscan homepage for supported interfaces. RE: Fiat Multiecuscan v2.2 Full Registered - rs@chip - 03-10-2015 Thank you..I instaled it but unfortionaly there is no option for lancia EDC15C2 ..any idea how to solve this ? RE: Fiat Multiecuscan v2.2 Full Registered - noexcape - 07-12-2015 Does any one know how to make elm327 work with windows 10? i had a laptop with win7 and all was ok, now when i install the drivers for win10 i get the error with code 10 in device manager. |