CarTechnoloGY
Modify km Golf VII cluster with carprog online - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55)
+---- Thread: Modify km Golf VII cluster with carprog online (/showthread.php?tid=70179)



Modify km Golf VII cluster with carprog online - sorin.henea - 12-10-2022

im looking to modify km from the cluster with carprog online but im getting an error " immo active , can`t enter service mode without working key "

the car has the BCM changed from scarp .


RE: Modify km Golf VII cluster with carprog online - Tekero - 12-10-2022

adopt immo then do your vodooo with carprog


RE: Modify km Golf VII cluster with carprog online - sorin.henea - 13-10-2022

The problem is that the Immo box is grey, I can't make the adapt!


RE: Modify km Golf VII cluster with carprog online - Tekero - 19-10-2022

make your car error free then try with odo


RE: Modify km Golf VII cluster with carprog online - jhon006 - 19-10-2022

(12-10-2022, 17:17 PM)sorin.henea Wrote:  im looking to modify km from the cluster with carprog online but im getting an error " immo active , can`t enter service mode without working key "

the car has the BCM changed from scarp .

normally i do a back up before i change something else..  what fault code you have on instrument cluster now?


RE: Modify km Golf VII cluster with carprog online - sorin.henea - 21-10-2022

(19-10-2022, 20:34 PM)jhon006 Wrote:  
(12-10-2022, 17:17 PM)sorin.henea Wrote:  im looking to modify km from the cluster with carprog online but im getting an error " immo active , can`t enter service mode without working key "

the car has the BCM changed from scarp .

normally i do a back up before i change something else..  what fault code you have on instrument cluster now?

active errors on cluster :
B104B31 - Key no signal 
B104C29 - Key range/ performance 
U112100 - Data bus message missing 
U111000 - Function restriction caused by communication interruption


RE: Modify km Golf VII cluster with carprog online - jhon006 - 22-10-2022

(21-10-2022, 20:54 PM)sorin.henea Wrote:  
(19-10-2022, 20:34 PM)jhon006 Wrote:  
(12-10-2022, 17:17 PM)sorin.henea Wrote:  im looking to modify km from the cluster with carprog online but im getting an error " immo active , can`t enter service mode without working key "

the car has the BCM changed from scarp .

normally i do a back up before i change something else..  what fault code you have on instrument cluster now?

active errors on cluster :
B104B31 - Key no signal 
B104C29 - Key range/ performance 
U112100 - Data bus message missing 
U111000 - Function restriction caused by communication interruption

Possible cause: 
engine ECU was changed, ECU was immo off and not adapted online..
you can try if you have Autell, xtool.. ALL key lost!  Good Luck