CarTechnoloGY
ISTA 4.37 Programming Issue - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: ISTA 4.37 Programming Issue (/showthread.php?tid=70200)

Pages: 1 2 3


ISTA 4.37 Programming Issue - ckcoding - 13-10-2022

Hello

I'm having some issues with trying to program via ISTA+.


Anyone else run into this in the past?

Interface: ENET


       



ISTAGUI.txt
File Type: .txt
Downloaded: 44 times
Size: 14.05 KB





----------------------------------------------------------------------------------------------------


BUMP 


I bought ICOM today and tried it with the same error again.



[attachment=139433]



RE: ISTA 4.37 Programming Issue - jogi8850 - 13-10-2022

have you change this line in ista gui exe? (true)

add key="BMW.Rheingold.ISTAGUI.enableENETprogramming" value="false"

regards


RE: ISTA 4.37 Programming Issue - ckcoding - 13-10-2022

(13-10-2022, 08:16 AM)jogi8850 Wrote:  have you change this line in ista gui exe? (true)

add key="BMW.Rheingold.ISTAGUI.enableENETprogramming" value="false"

regards

Yes

Thanks,but still same

Best regards.

   


RE: ISTA 4.37 Programming Issue - TheNine90 - 13-10-2022

Do you have full psdzdata files for ISTA?
Check if you have programming enable in the ista config


RE: ISTA 4.37 Programming Issue - ckcoding - 13-10-2022

(13-10-2022, 09:18 AM)TheNine90 Wrote:  Do you have full psdzdata files for ISTA?
Check if you have programming enable in the ista config

Thanks for answer.yes,all enabled and full psdzdata in folder.

   


RE: ISTA 4.37 Programming Issue - davidoff86 - 13-10-2022

You need a new licence. See the top pinned post


RE: ISTA 4.37 Programming Issue - ckcoding - 13-10-2022

(13-10-2022, 09:38 AM)davidoff86 Wrote:  You need a new licence. See the top pinned post

I just installed version 4.37.43, installed a new ssd on my computer and formatted it.Everything is new.


RE: ISTA 4.37 Programming Issue - Yah - 13-10-2022

(13-10-2022, 07:50 AM)Clean out the old .Reg key with Rcleaner.exe then install new ista version .Reg key and make sure that the InstallLocation : C:\ProgramData\BMW\ISPI\data\TRIC\ISTA   is placed in the registry along with the other string value. Wrote:  An example of my ISTA registry for the Psdzdata to be read by ISTAD and calculate measure plan ( software update)

[HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\BMWGroup\ISPI\ISTA]

"ProductVersion"="4.32.15.24911"
"MainProductVersion"="4.32"
"DataVersion"="4.32.12"
"LogisticBaseVersion"="4.32.12"
"DataVersion_de-DE"="4.32.12"
"DataVersion_en-GB"="4.32.12"
"SWIData"="4.32.12"
"InstallLocation"="C:\\ProgramData\\BMW\\ISPI\\data\\TRIC\\ISTA"

Then restart your Laptop
Buy the ICOM and use it with ISTAD not cheap Enet Cable .
The Enet cable doesnt display voltage on KL15 and KL30
The ICOM interface does



RE: ISTA 4.37 Programming Issue - davidoff86 - 13-10-2022

(13-10-2022, 09:40 AM)ckcoding Wrote:  
(13-10-2022, 09:38 AM)davidoff86 Wrote:  You need a new licence. See the top pinned post

I just installed version 4.37.43, installed a new ssd on my computer and formatted it.Everything is new.

Yes, and as seopy has said, if you had a licence prior to 4.37, then you need a new one as they've changed the allowed dealers


RE: ISTA 4.37 Programming Issue - ckcoding - 13-10-2022

(13-10-2022, 10:32 AM)davidoff86 Wrote:  
(13-10-2022, 09:40 AM)ckcoding Wrote:  
(13-10-2022, 09:38 AM)davidoff86 Wrote:  You need a new licence. See the top pinned post

I just installed version 4.37.43, installed a new ssd on my computer and formatted it.Everything is new.

Yes, and as seopy has said, if you had a licence prior to 4.37, then you need a new one as they've changed the allowed dealers

i guess I couldn't tell.I was using 4.32.15 before, didn't want a license, I installed a new ssd on my computer and reinstalled windows.I asked Sedoy for a license for the first time for 4.37.42.Do I still need a new license?