CarTechnoloGY
GODIAG V600-BM Impressions - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: GODIAG V600-BM Impressions (/showthread.php?tid=70402)

GODIAG V600-BM Impressions - 2013m5 - 18-10-2022

Does anyone used the GODIAG V600 for ISTA / ISTA-P?
Very appropriate for feedback.

   
   

RE: GODIAG V600-BM Diagnostic and Programming Tool for BMW - jegen - 18-10-2022

Im using GODIAG V600 mit Ista 4.31(i do not have newer).I have tested it with E60,E39,F10,F20,E70 and F11. So far it works good with these cars and Inpa and NCSexper work also.But i only tested diagnosis, not programming. Service is not really good, i need some emails to get Software in English to register the Interface.On there homepage i only found chinese Software.

RE: GODIAG V600-BM Diagnostic and Programming Tool for BMW - 2013m5 - 18-10-2022

(18-10-2022, 20:32 PM)jegen Wrote:  Im using GODIAG V600 mit Ista 4.31(i do not have newer).I have tested it with E60,E39,F10,F20,E70 and F11. So far it works good with these cars and Inpa and NCSexper work also.But i only tested diagnosis, not programming. Service is not really good, i need some emails to get Software in English to register the Interface.On there homepage i only found chinese Software.

Thank you very much for the info. I did some search and found to register, you have to install the .exe file and everything in there. All info in the text file.
GODIAG V600-BM.txt
File Type: .txt
Downloaded: 19 times
Size: 262 bytes



RE: GODIAG V600-BM Diagnostic and Programming Tool for BMW - martinez9049 - 30-10-2022

(18-10-2022, 20:32 PM)jegen Wrote:  Im using GODIAG V600 mit Ista 4.31(i do not have newer).I have tested it with E60,E39,F10,F20,E70 and F11. So far it works good with these cars and Inpa and NCSexper work also.But i only tested diagnosis, not programming. Service is not really good, i need some emails to get Software in English to register the Interface.On there homepage i only found chinese Software.

How did you get to use with standard tools? I’ve tried all sorts of ways and never had any luck so I just threw it in the bottom drawer of my desk

RE: GODIAG V600-BM Diagnostic and Programming Tool for BMW - 2013m5 - 30-10-2022

I was send an email to them, and they on tested with ISTA 4.36.30. I ordered one to use with my old cars. It’s arriving on next Friday, and I’ll test/post the feedback.

RE: GODIAG V600-BM Diagnostic and Programming Tool for BMW - jegen - 31-10-2022

(30-10-2022, 03:57 AM)martinez9049 Wrote:  
(18-10-2022, 20:32 PM)jegen Wrote:  Im using GODIAG V600 mit Ista 4.31(i do not have newer).I have tested it with E60,E39,F10,F20,E70 and F11. So far it works good with these cars and Inpa and NCSexper work also.But i only tested diagnosis, not programming. Service is not really good, i need some emails to get Software in English to register the Interface.On there homepage i only found chinese Software.

How did you get to use with standard tools? I’ve tried all sorts of ways and never had any luck so I just threw it in the bottom drawer of my desk
I use it like normal Icom. I change setting with easyconnect
Remote-ip of V600-Obd_ab625, then i Reserve V600 with Itool Radar

RE: GODIAG V600-BM Diagnostic and Programming Tool for BMW - martinez9049 - 31-10-2022

(31-10-2022, 05:00 AM)jegen Wrote:  
(30-10-2022, 03:57 AM)martinez9049 Wrote:  
(18-10-2022, 20:32 PM)jegen Wrote:  Im using GODIAG V600 mit Ista 4.31(i do not have newer).I have tested it with E60,E39,F10,F20,E70 and F11. So far it works good with these cars and Inpa and NCSexper work also.But i only tested diagnosis, not programming. Service is not really good, i need some emails to get Software in English to register the Interface.On there homepage i only found chinese Software.

How did you get to use with standard tools? I’ve tried all sorts of ways and never had any luck so I just threw it in the bottom drawer of my desk
I use it like normal Icom. I change setting with easyconnect
Remote-ip of V600-Obd_ab625, then i Reserve V600 with Itool Radar

Huh, ok well I could use it just fine with ISTA but it wouldn't work with standard tools. I guess I'll give it another shot.