+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Programming Problem Used Entrynav2 Controller ATM reset (/showthread.php?tid=70781)
Pages:
1
2
RE: Programming Problem Used Entrynav2 Controller ATM reset - tokarszczak - 30-11-2022
You need virginise ELV, thats all.
RE: Programming Problem Used Entrynav2 Controller ATM reset - alexturbo - 08-12-2022
(30-11-2022, 17:56 PM)tokarszczak Wrote: You need virginise ELV, thats all.
BDC has no error for ELV even if I disconnect ELV connector.
BDC wrong coding. What is the best way to encode it correctly?
RE: Programming Problem Used Entrynav2 Controller ATM reset - Siki78 - 08-12-2022
After svt_soll calculation finish push button HW-IDs from SVTactual then calculate TAL
RE: Programming Problem Used Entrynav2 Controller ATM reset - alexturbo - 19-12-2022
(08-12-2022, 22:20 PM)Siki78 Wrote: After svt_soll calculation finish push button HW-IDs from SVTactual then calculate TALThank you after this method could finally program/encode BDC and all module.
The only thing I don't understand is ELV still stays locked despite ignition going on and no error code about ELV.
ELV virginise done.
Read out with Tool32: STAT_ELV_HW_CODING_TEXT = ELV is not actively coded.
RE: Programming Problem Used Entrynav2 Controller ATM reset - megalo84 - 04-01-2023
buy a new bdc for your vin, right now it's really cheap!
RE: Programming Problem Used Entrynav2 Controller ATM reset - alexturbo - 23-01-2023
(04-01-2023, 17:42 PM)megalo84 Wrote: buy a new bdc for your vin, right now it's really cheap!I first removed the ELV completely from the vehicle. First of all, they don't cause any problems.