Question - full reading of MSD 81.2 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Question - full reading of MSD 81.2 (/showthread.php?tid=70802) |
Question - full reading of MSD 81.2 - Cowboy - 27-10-2022 Hello ! Can someone tell me what tool I can do a full reading of MSD81.2. Of course, preferably without opening the ECU. I did it with Kess but the file seems to be encrypted. Can such a file be used if the ECU is bricked? Any suggestions are welcome. Regards, Cowboy RE: Question - full reading of MSD 81.2 - atomantmk - 28-10-2022 Youu can read with CGDI FC-200 RE: Question - full reading of MSD 81.2 - m3-flo420 - 28-10-2022 (28-10-2022, 08:08 AM)atomantmk Wrote: Youu can read with CGDI FC-200 Can a CGDI FC-200 clone a MSD 80.2? Thanks RE: Question - full reading of MSD 81.2 - AZCKNCLLC - 28-10-2022 (27-10-2022, 19:29 PM)Cowboy Wrote: Hello ! Can someone tell me what tool I can do a full reading of MSD81.2. Of course, preferably without opening the ECU. I did it with Kess but the file seems to be encrypted. Can such a file be used if the ECU is bricked? Any suggestions are welcome. Hextag / hexprog can do full reading and cloning. RE: Question - full reading of MSD 81.2 - Cowboy - 29-10-2022 (28-10-2022, 08:08 AM) atomantmk Wrote: Youu can read with CGDI FC-200Yes, I saw it in the description of the AT200, but I also saw the opinions that the AT200 can kill these ECUs. Do you have any personal experience with the AT 200? (28-10-2022, 13:33 PM)m3-flo420 Wrote:(28-10-2022, 08:08 AM)atomantmk Wrote: Youu can read with CGDI FC-200 (28-10-2022, 14:41 PM)AZCKNCLLC Wrote:This is a bit too expensive option for me at the moment - I do not deal with it on a daily basis and I would have to pay for the license.(27-10-2022, 19:29 PM)Cowboy Wrote: Hello ! Can someone tell me what tool I can do a full reading of MSD81.2. Of course, preferably without opening the ECU. I did it with Kess but the file seems to be encrypted. Can such a file be used if the ECU is bricked? Any suggestions are welcome. RE: Question - full reading of MSD 81.2 - CodeDoc - 30-10-2022 i worked in boot mode with Ktag orginal RE: Question - full reading of MSD 81.2 - Cowboy - 31-10-2022 (30-10-2022, 16:33 PM) CodeDoc Wrote: i worked in boot mode with Ktag orginal has anyone used a Ktaag clone for this work? RE: Question - full reading of MSD 81.2 - al70 - 31-10-2022 i can't find you're ecu in ktag clone RE: Question - full reading of MSD 81.2 - Cowboy - 01-11-2022 (31-10-2022, 08:50 AM)al70 Wrote: i can't find you're ecu in ktag clone In fact, there is no MSD 81.2 in the Ktaag (clone) protocols. I am curious if the PCM (clone) can do this. There is TC 1796 in module 53. RE: Question - full reading of MSD 81.2 - krug - 01-11-2022 (01-11-2022, 08:52 AM)Cowboy Wrote:(31-10-2022, 08:50 AM)al70 Wrote: i can't find you're ecu in ktag clone Pcm don't read msdxxx, u can full read with flex boot mode, ktag boot mode and probably few other expensive tools. Bench won't read full as flash psw protected. For clone need boot read. |